xxxtreme22r's 1987 Pickup Build-Up Thread
#502
Registered User
Thread Starter
nope, that one used white blade you had in there, worked well.
EDIT: where did you get that cast iron blade at, just looked on the Home Depot site and they don't have it. and Lowe's don't carry Milwaukee.
EDIT: where did you get that cast iron blade at, just looked on the Home Depot site and they don't have it. and Lowe's don't carry Milwaukee.
Last edited by xxxtreme22r; 03-02-2011 at 06:16 AM.
#503
YotaTech Milestone-Two Millionth Post
#504
Registered User
Good job man! I think you'll like the stance once you get those in.
As for the blade, that's interesting. I have never seen one of them...then again I haven't looked for one either.
.
As for the blade, that's interesting. I have never seen one of them...then again I haven't looked for one either.
.
#505
YotaTech Milestone-Two Millionth Post
bought it to cut apart an old cast iron tub and pipes......but just smashed the hell outta the tub with a sledge instead....more fun
#506
Registered User
Thread Starter
ok, stuck on u-bolt size, I wanna say 9/16" thread size, 2 1/2" between threads and 6" long.
But not sure if the thread size is 1/2 or 9/16 and if the u bolts are 2 1/2 between or something else. And damn u-bolts are expensive.
And Noone has a part listing for u-bolts for this damn thing. Yes I searched on here as well, it's always u-bolt flip kit crap. And to measure. I did measure and I come u with 2.4" between the u-bolt opening (maybe the opening gets smaller when tightened?), 6" length (I know I can trim longer oes down) and .563" (14.29mm) close enough to 9/16 for me.
This would be a hell of a lot easier if my 75 year old bitch of a neibor would just mind her own damn business and shut up. She even called the landlord on the other guy that lives in the other end of the tri-plex that he had a few friends there overnight. I was like WTF???? And yet the stupid landlord just lets her get away with it. One of these days I am just gonna slap a harassment suit on her. Respect my elders yeah ok, whatever not this one.
Closest I found on Napa are these http://www.napaonline.com/Search/Det...030_0282438535 but they are an 1/8" off from 2 1/2 between threads.
Contents : Hi-Nuts
Spring U-Bolt Length : 8"
Spring U-Bolt Thread Size : 9/16"
Spring U-Bolt Type : Universal
U-Bolt Distance Between Threads : 2 5/8"
But not sure if the thread size is 1/2 or 9/16 and if the u bolts are 2 1/2 between or something else. And damn u-bolts are expensive.
And Noone has a part listing for u-bolts for this damn thing. Yes I searched on here as well, it's always u-bolt flip kit crap. And to measure. I did measure and I come u with 2.4" between the u-bolt opening (maybe the opening gets smaller when tightened?), 6" length (I know I can trim longer oes down) and .563" (14.29mm) close enough to 9/16 for me.
This would be a hell of a lot easier if my 75 year old bitch of a neibor would just mind her own damn business and shut up. She even called the landlord on the other guy that lives in the other end of the tri-plex that he had a few friends there overnight. I was like WTF???? And yet the stupid landlord just lets her get away with it. One of these days I am just gonna slap a harassment suit on her. Respect my elders yeah ok, whatever not this one.
Closest I found on Napa are these http://www.napaonline.com/Search/Det...030_0282438535 but they are an 1/8" off from 2 1/2 between threads.
Contents : Hi-Nuts
Spring U-Bolt Length : 8"
Spring U-Bolt Thread Size : 9/16"
Spring U-Bolt Type : Universal
U-Bolt Distance Between Threads : 2 5/8"
Last edited by xxxtreme22r; 03-02-2011 at 07:41 AM.
#507
Registered User
Thread Starter
Ok this helps me some; http://store.fatbobsgarage.com/_toyo...995-p5756.aspx
Toyota Pickup Rear 2.5" Axle U-Bolt Kit 1987-1995
(4) 9/16 x 2-1/2 x 8-1/2 SQ 20 Clear Zinc Coated U-Bolts w/ Hardware
Last edited by xxxtreme22r; 03-02-2011 at 07:49 AM.
#508
YotaTech Milestone-Two Millionth Post
well, I've met her.......she's nice......maybe she just needs some XXXTREME romping....hehehehe (reference the movie KINGPIN....and his landlord......ahahahaha....for some reason I was talking about that yesterday with the wife)
#509
Registered User
Thread Starter
A&A found a set in the warehouse, $60 for the kit, assuming 4. Might not have them till tomorrow though. Girlfriend doesn't have break till 2:15 missed her lunch and I need her card. lol.
Last edited by xxxtreme22r; 03-02-2011 at 08:18 AM.
#510
Registered User
Thread Starter
Just called A&A back, those guys are awesome, he's gonna order them and have them delivered from the warehouse. Same place I picked the bushings up from. Won't have to pay for them first. Should be there by 4pm.
I wish I knew yesterday the girlfriend would be willing to buy something that I needed, I would have just picked them up yesterday.
I wish I knew yesterday the girlfriend would be willing to buy something that I needed, I would have just picked them up yesterday.
#511
Registered User
Thread Starter
for my reference: Page 973 FSM.
Spring Center Bolt 33 ft-lb Torque before placing on ground
Rear Shock 47 ft-lb torque before placing on ground
u-bolt 90 ft-lb torque before placing on ground
Rear Spring Shackle 67 ft-lb do not torque till on the ground
Front Spring Bracket 67 ft-lb do not tighten till on the ground.
Spring Center Bolt 33 ft-lb Torque before placing on ground
Rear Shock 47 ft-lb torque before placing on ground
u-bolt 90 ft-lb torque before placing on ground
Rear Spring Shackle 67 ft-lb do not torque till on the ground
Front Spring Bracket 67 ft-lb do not tighten till on the ground.
Last edited by xxxtreme22r; 03-02-2011 at 11:54 AM.
#512
Registered User
Thread Starter
Oh yeah forgot guys, girlfriend said it should be my preference, but I am only out to impress you guys right? So I figured, I'd better ask.
White outline letters (RWOL) in or out? I mounted the first one in. But my 31's are out.
White outline letters (RWOL) in or out? I mounted the first one in. But my 31's are out.
#516
Registered User
#517
Registered User
Thread Starter
what time tomorrow Jerry? Any preference? Gonna have my little one too, but gonna be a little bit of a chilly start in the morning. Still got to load up the truck though.
#518
Registered User
Thread Starter
lol not for long.
Oh and I'll ay it now, those look like they are about an inch or so longer than factory. I am not gonna cut them down yet, because I still have to check pinion angle and whatnot because of those shackles. Not sure if I am gonna need a shim or not, hopefully they are gonna be long enough to fit em.
Oh and I'll ay it now, those look like they are about an inch or so longer than factory. I am not gonna cut them down yet, because I still have to check pinion angle and whatnot because of those shackles. Not sure if I am gonna need a shim or not, hopefully they are gonna be long enough to fit em.
Last edited by xxxtreme22r; 03-02-2011 at 03:07 PM.
#519
Registered User
iTrader: (5)
I always go blacked out, but like Rob said, that's just me. AND YET, .....I had that white 4Runner, ....in which case, the white letters where out, black rims and black dlx trim. Looked good! You're not going white in the end, so for ME, personally, ....I'd leave em black OUT, white IN.