xxxtreme22r's 1987 Pickup Build-Up Thread
#221
Registered User
Thread Starter
crappy photos, the passenger side marker light is different than the drivers side. A few of the led's in the passenger side brake/tail light are out. But they are slightly brighter than the photos show. The reverse lights are bright as hell. Oh and the tool box fits.
#226
Registered User
Thread Starter
it's aluminum Jerry. I don't think it will take kindly to someone beating and prying on ebrake parts like the oem bumper did. Which didn't last much longer after that I might add.
#229
Registered User
Thread Starter
Thanks.
I got the lic plate on today. I guess the is the mandatory, must use zip ties on your rig somewhere.
Haha only kidding, I do have them on there though obviously, but I spent like $9 bucks on stainless steel hardware. 5 or 6 bolts (1/4-20), fender washers and nyloc nuts. All Stainless. Of course I will only need two.
Got dark and is now snowing. So have not put them on yet.
The old bed is now hacked up into pieces. Half of which is now sitting inside my bed. I tell you what, it's nice not to have to srap anything down on my bed now.
I think I am gonna figure out a way to run a tarp on top though as I do not feel like shoveling out snow from the bed every time we get more than an inch or two.
Oh and a hi-lift mount.
I got the lic plate on today. I guess the is the mandatory, must use zip ties on your rig somewhere.
Haha only kidding, I do have them on there though obviously, but I spent like $9 bucks on stainless steel hardware. 5 or 6 bolts (1/4-20), fender washers and nyloc nuts. All Stainless. Of course I will only need two.
Got dark and is now snowing. So have not put them on yet.
The old bed is now hacked up into pieces. Half of which is now sitting inside my bed. I tell you what, it's nice not to have to srap anything down on my bed now.
I think I am gonna figure out a way to run a tarp on top though as I do not feel like shoveling out snow from the bed every time we get more than an inch or two.
Oh and a hi-lift mount.
Last edited by xxxtreme22r; 01-11-2011 at 03:58 PM.
#235
Registered User
Thread Starter
While the motor was out I spray bottled in this stuff:
Left it sit a bit, and then loaded some more of that stuff into a pressure washer. The rest of the engine was cleaned and whatnot during the rebuild.
Left it sit a bit, and then loaded some more of that stuff into a pressure washer. The rest of the engine was cleaned and whatnot during the rebuild.