ToyoTech559's 1988 4Runner Build-Up Thread
#161
#166
thank you. its alot of work lol. i love working on my own stuff but takes longer when you never done it before. welding, grinding, welding, grinding, and so on lol i still need to drill and tap the 4 holes. alot hard than i expected. so im gonna try it again tomorrow.
#167
Registered User
just checked out your build. comeing along nicely, I love that you used 3rd gen coils for your zuk mod I wondered if they would work I just happen to have a set laying around that will now soon be installed in mine LOL. good luck on the rear axle install, I love the Elocker in my 3rd.
#171
just checked out your build. comeing along nicely, I love that you used 3rd gen coils for your zuk mod I wondered if they would work I just happen to have a set laying around that will now soon be installed in mine LOL. good luck on the rear axle install, I love the Elocker in my 3rd.
should look into getting one for your 93
thanks, i hope i set it up good. got the holes made. the long studs line up ok but the other two are off by like a mm or two. i might enlarge the hole on the diff and hope the FIPG will seal it all up..
#173
merry xmas and happy new years to you tooo
#174
My front diff is sealed with orange fipg and doesn't leak a drop and I didn't do it so it's hard telling how long it's been on there, I'm sure yours will be fine...
#175
got some bad news and some good news
the bad: got to work, all ready and excited to swap it all out. i go to lock and unlock the locker and the motor goes POOP. WTF. it just stopped working. than i go install it after i dropped my old diff assembly already. found out the spring perches on the diff housing i got are way to wide. the 4runner ones are nice and skinny. u bolts on work. guess my xmas locker is not gonna happen. was hoping to do some wheeling for new years with it. now i have to find another diff housing, re mod it. buy or steal a motor off the other elocker i have saved for other project and get this done already... sigh.. what a ˟˟˟˟ty day
good news: to try and bounce back, i was gonna wait till the elocker and re gear works out before i did this. gonna order an arb bumper and winch.
FML....
the bad: got to work, all ready and excited to swap it all out. i go to lock and unlock the locker and the motor goes POOP. WTF. it just stopped working. than i go install it after i dropped my old diff assembly already. found out the spring perches on the diff housing i got are way to wide. the 4runner ones are nice and skinny. u bolts on work. guess my xmas locker is not gonna happen. was hoping to do some wheeling for new years with it. now i have to find another diff housing, re mod it. buy or steal a motor off the other elocker i have saved for other project and get this done already... sigh.. what a ˟˟˟˟ty day
good news: to try and bounce back, i was gonna wait till the elocker and re gear works out before i did this. gonna order an arb bumper and winch.
FML....
#177
yup. not sure how long before i find another axle that will work. guess the winch will have to do for now. not sure how long till everything comes in since arb bumpers i have heard takes some time