SAS'dToy's 1992 Pickup Build-Up Thread
#41
Registered User
These guys had one for $650.00. There in AL. I'll ask around and see if I can find one around here.
http://www.431autoparts.com/
http://www.431autoparts.com/
#47
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Thanks....
Progress: 4/20/06
I got my RE's yesterday, Bad news is that they were not the one's I needed. :cry: So I sent them back and the guy gave me my $$$ back...very cool.
I built(started fabbing) up the tower for my upper 3-link(sorry no pics tonight, try to get them up tomorrow) I am hoping to finish it up tomorrow. Also, I am in hopes of coming into some $$$ soon, which means MORE PARTS I am going to order all my ends(Currie or RE? opinions...) Heading to the 'yard tomorrow also(gonna go and get some Aerostar coils and whatever else I can find that I like)
Does anyone else on here have a Hypertherm Plasma Cutter? I want to rant about mine for a minute...I went to Sunox(our local welding/cutting equipment outfit) to get some new consumables(for those who don't know-the parts inside the plasma cutters gun that wear out). When I left there I had 4 SMALL packages in my hand(12 pieces total) It cost me $107! Thats insane!
Progress: 4/20/06
I got my RE's yesterday, Bad news is that they were not the one's I needed. :cry: So I sent them back and the guy gave me my $$$ back...very cool.
I built(started fabbing) up the tower for my upper 3-link(sorry no pics tonight, try to get them up tomorrow) I am hoping to finish it up tomorrow. Also, I am in hopes of coming into some $$$ soon, which means MORE PARTS I am going to order all my ends(Currie or RE? opinions...) Heading to the 'yard tomorrow also(gonna go and get some Aerostar coils and whatever else I can find that I like)
Does anyone else on here have a Hypertherm Plasma Cutter? I want to rant about mine for a minute...I went to Sunox(our local welding/cutting equipment outfit) to get some new consumables(for those who don't know-the parts inside the plasma cutters gun that wear out). When I left there I had 4 SMALL packages in my hand(12 pieces total) It cost me $107! Thats insane!
#48
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Progress: 4/25/06
OK! I did it..I placed the order
11- 1-1/4x12 Currie Johnny Joints w/ FORGED(not welded) shank, 9/16" mounting bolt(39.99 ea w/o 9/16" bolt)
11- 1-1/4x12 Jam Nuts($4.00 ea! roughly)
2- Axle link tabs(0*)
2-Upper Chassis Mounts
1-lower left side mount(picture the right reversed)
1 lower right side mount
i got lazy and ordered these too(could have made them but why, other than the fact they cost almost $160)
OK! I did it..I placed the order
11- 1-1/4x12 Currie Johnny Joints w/ FORGED(not welded) shank, 9/16" mounting bolt(39.99 ea w/o 9/16" bolt)
11- 1-1/4x12 Jam Nuts($4.00 ea! roughly)
2- Axle link tabs(0*)
2-Upper Chassis Mounts
1-lower left side mount(picture the right reversed)
1 lower right side mount
i got lazy and ordered these too(could have made them but why, other than the fact they cost almost $160)
#52
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
I got a 2.7 for mock up now also.
What y'all think about this
http://www.polyperformance.com/shop/...&cat=34&page=1
the 18" ones
What y'all think about this
http://www.polyperformance.com/shop/...&cat=34&page=1
the 18" ones
#54
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
i hope.....this is getting REAL FRIGGIN EXPENSIVE
FZJ-80 axles--------------------$1600(after the cost of fuel to pick 'em up)
Johnny Joints-------------------$330
Jam Nuts------------------------$40
Link Tabs and Brackets--------$220
Chassis wiring harness--------$100(bought truck with it )
Frame---------------------------$100(not using it now)
Cab------------------------------(already had it)
Fox Air Shocks-----------------$900~
R151F---------------------------$700(range)
MC08 R10----------------------$499
T-case--------------------------$50-$100
23sp 4.7 gears-----------------$449
3RZ-FE--------------------------$1000(very low miles)
Tires----------------------------$1200
Wheels-------------------------$500(after recentered)
Cable conversion(elocker)---$300($140~ea)
HD tie rod and draglink-------$100
Interior Stuff(seats and such)$200
If it is in the red I haven't purchased it yet....I know there is more.
FZJ-80 axles--------------------$1600(after the cost of fuel to pick 'em up)
Johnny Joints-------------------$330
Jam Nuts------------------------$40
Link Tabs and Brackets--------$220
Chassis wiring harness--------$100(bought truck with it )
Frame---------------------------$100(not using it now)
Cab------------------------------(already had it)
Fox Air Shocks-----------------$900~
R151F---------------------------$700(range)
MC08 R10----------------------$499
T-case--------------------------$50-$100
23sp 4.7 gears-----------------$449
3RZ-FE--------------------------$1000(very low miles)
Tires----------------------------$1200
Wheels-------------------------$500(after recentered)
Cable conversion(elocker)---$300($140~ea)
HD tie rod and draglink-------$100
Interior Stuff(seats and such)$200
If it is in the red I haven't purchased it yet....I know there is more.
Last edited by SAS'dToy; 05-14-2006 at 06:24 PM.
#57
Registered User
Thread Starter
Join Date: Dec 2004
Location: Granite Falls, NC
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Inventory(pics soon, I promise)
11-Currie Johnny Joints 2-5/8" mounting width 1-1/4x12 forged stud
11-1-1/4x12 nuts
2-axle link mounts
2-upper link mounts
2-lower frame link mounts
2-bushings for upper 3-link wishbone
1-outrageous bill :pat:
I also brought the truck cab/frame up into the shop and started the cleaning of the frame so I can mount my brackets. I have been toying with the idea of running a 3.4L and coils up front as opposed to air shox and a 2.7, whatcha think?
11-Currie Johnny Joints 2-5/8" mounting width 1-1/4x12 forged stud
11-1-1/4x12 nuts
2-axle link mounts
2-upper link mounts
2-lower frame link mounts
2-bushings for upper 3-link wishbone
1-outrageous bill :pat:
I also brought the truck cab/frame up into the shop and started the cleaning of the frame so I can mount my brackets. I have been toying with the idea of running a 3.4L and coils up front as opposed to air shox and a 2.7, whatcha think?
#60
Contributing Member
Join Date: Dec 2005
Location: San Antonio, TX
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
I hear that leaves are 999999x easier than coils. Just an idea to throw around. The 3.4 sounds like a very good idea though. Some people get lots of power out of em.