RogueYota's 87 Budget Build Thread!!
01-22-2013, 09:35 PM
#303
Registered User
Thread Starter
Just came in!! 
But in all my excitement or ordering parts I forgot a key component....ubolt flip 
I figured I would get the axle hung...then worry about shocks, brakes, shaft, rebuild and all that....forgot a kinda major piece lol Got everything else though!! lol
But in all my excitement or ordering parts I forgot a key component....ubolt flip I figured I would get the axle hung...then worry about shocks, brakes, shaft, rebuild and all that....forgot a kinda major piece lol Got everything else though!! lol
01-23-2013, 09:25 PM
#306
Registered User
Thread Starter
Im not sure actually lol Didnt touch my torsion bars...no blocks...and didnt cut or clearance anything! Didnt rub in the front at full stuff and turned. Rubbed only if I was crazy flexed in the back.
01-28-2013, 10:55 PM
#307
Registered User
Thread Starter
So should have the IFS cut out within the next few days....just a little update. Also been thinkin 22R Propane Turbo or 2RZ Turbo.
Last edited by RogueYota; 01-28-2013 at 10:56 PM.
02-01-2013, 10:39 PM
#312
Registered User
Thread Starter
Im to the point where I can put the axle in...at put the truck on its own weight. Just need a torch and welder as I moved and dont have the luxuries of my dads shop anymore 
All I need for it be 100% done
1. Rebuild kit
2. Gears
3. Drive Shaft
4. Brake Lines
5. Possibly Longer Shocks
All I need for it be 100% done
1. Rebuild kit
2. Gears
3. Drive Shaft
4. Brake Lines
5. Possibly Longer Shocks
02-13-2013, 12:01 AM
#314
Registered User
Thread Starter
Soo...I rinsed the truck down from new years and noticed my passenger flow was quite wet...so I went down to Home Depot and bought some window sealer. I ripped all that chrome trim off and just filled it in...havent tested it yet.
Also doing my training on poser flex for when my SAS is done!! lol
IFS should be coming out this weekend..I HOPE!
Also doing my training on poser flex for when my SAS is done!! lol
IFS should be coming out this weekend..I HOPE!
02-16-2013, 10:58 PM
#316
Registered User
Thread Starter
Thanks man! Yeah I love looking at other rigs and getting ideas. Most of my truck are my own thoughts though 
Im excited to see where yours ends up man!
Im excited to see where yours ends up man!
02-18-2013, 06:49 PM
#319
Registered User
Thread Starter
So i've come to realize that I HATE the look of tube shock hoops...just so you all know...just a random truth.
Anyways...nothing new in the last few days. Just waiting to get my hands on a torch to get this IFS out :/ Come pay day ill be buying my extended brake lines...one step closer to road worthy after the swap.
Anyways...nothing new in the last few days. Just waiting to get my hands on a torch to get this IFS out :/ Come pay day ill be buying my extended brake lines...one step closer to road worthy after the swap.
02-18-2013, 08:07 PM
#320
Registered User
Well, there's either the Ford shock towers, or I recently discovered an option from LowRange offroad: http://www.lowrangeoffroad.com/index...a-ssp-ust.html
A little more, but they do look pretty well braced and plenty of area for welding to the frame.
I'm in sort of the same boat as you, got all parts on hand, but need a torch and welder(and someone who can weld, in my case).
A little more, but they do look pretty well braced and plenty of area for welding to the frame.
I'm in sort of the same boat as you, got all parts on hand, but need a torch and welder(and someone who can weld, in my case).
