RBX

Fixed it!!
One or a few plugs were bad, replaced them all.

ChefYota4x4

iTrader: (5)

DAYUUMMMMMMMMMM, .........................I wanna easy fix like that for once! hahaha. CONGRATULATIONS, man... Bet that's a relief! (Not that you were panicked... just sayin, lol).

RBX

I think the injectors could use a rebuild, but for now I'll just sea foam them.
Thanks for all the help guys

RBX

Finished the OBA tonight, I ended up fitting the 1.5gal tank temporarily under the truck till I can get a larger tank.

I'm thinking of making a shower from a jerey can using my OBA to pressurize the can. I figure for now I may just use my stove and boil some water to add to the can for a set warmish temp. I'll update with pics.

ChefYota4x4

iTrader: (5)

OOOH, pressurized shower! lol. BLAST THE DIRT OFF with a 4 second burst! hahaha.

Nice.... As always

ToyoTech559

nice idea on the OBS using OBA lol

why did you take care of the Code 51, when you had it apart? iirc it the knock sensor

ChefYota4x4

iTrader: (5)

Hey.... THAT IS EXACTLY what my buddy said about the problem he had, RB... "OMGOSHHHHHH, ... Love the 3.0, it's done me very well for 310K... But design flaws? Yeah, the pipe on the back, WORST! ... The knock sensor 3.0 problem? CLOSE SECOND!" .... He will call me later, but I don't think he was saying 51 code... Thought he said something else for the Knock code.

AC, eh? Maybe it's low enough on charge, and for some reason, in your SPECIAL rig, it's throwing a code saying, "I'm low, fill me up!"....... NO? hahaha. Maybe a AC-VSV issue? No clue... But when I talk to him, I'll keep him on track about the FIFTY ONE! lol.

RBX

Code 52 is the Knock Sensor, and that has been fixed for quite some time.
The code 51 actually started before i tore the top end down, but she gave no running issues, i just check the diagnostics every month or so to keep her tip-top.
I have this thread started to try and figure out the 51, if it even matters.
https://www.yotatech.com/forums/f116.../#post51926945

In other news, i snapped no photos last night, but i did order some OME CS009R springs for her saggy rear. I'm debating on weather or not to do a u-bolt flip and shock relocate at the same time.

RBX

well i'm not the first

found here
http://thatguysgarage.com/podcast/tg...ff-road-shower

another idea called road shower

ChefYota4x4

iTrader: (5)

Cool showers! That one on the roof, ...that's a solar idea? Looks clear on top, black on bottom, no?

ChefYota4x4

iTrader: (5)

Yeah, sorry on the code thing..... Spoke to him again and I told him to stop by your 51 thread, lol. He might... Helpful guy, for sure, lol..

Anyway, have a nice weekend coming up here, RB!

RBX

yes it is clear and can be pressurized with a pump to 7psi.
For this summer trip i will use a bilge pump and pre-warmed h2o. later i plan to add a heat exchanger.

RBX

AAAAAANNNNNNNNNDDDDDDDD

4x4Connection.com (AKA ironpigoffroad.com ROCKS!!!! ordered the Old Man Emu CS009R (Dakar Series Medium duty) yesterday and they should be here Tuesday....hello comfy ride.

ChefYota4x4

iTrader: (5)

They hefty......IN PRICE? hahaha. What's the damage on those, bud? And what type lift height are they for? (Sorry, I will look it up, lol).

ChefYota4x4

iTrader: (5)

Ok, so 200$ or so by the end of it for a pair of packs? Did you do the u bolts/flip kit/greaseable shackles, etc., etc. ? lol.

RBX

Total was around 270$ shipped. Got the bushings too. Already have greasable fittings. Debating on to do the flip also. Not sure where I want to place my shocks yet. Price on the springs was $92 I think, best I could find.

ChefYota4x4

iTrader: (5)

Ahhh, ok. Well, that seems VERY reasonable for a NICE SOFT AND CAPABLE FLEXY RIDE! LOL. RIGHT? haha.

RBX

OBA compressor mount of the 1.5gal compressor tank. This is temporary till I find a larger tank I can fit.˟

Outsane

sweet...

a little worried about the red hose next to the exhaust..

RBX

Red hose has a few inches actually.
Thanks