RBX

Ordered a Kodiak mechanical caliper today. Should be here the end of the week, then I need to get a rotor. The rotor should be the easier part of this equation.

RBX

SCORE!!!!!!!
Surco aluminum Roof-Rack or Roof-Basket or Cargo-Rack...whatever you want to call it.
$32 bucks at the Pick'nPull

ChefYota4x4

iTrader: (5)

HOLY CRAP, YOU .........should be congratulated! hahahahaha. Seriously, CONGRATZ, MAN! Looks good! NEVER see stuff like that at our Pick-n-Pulls,... 3rd members, etc., all gone the second they come in. ANYTHING worth anything is gone, actually! lol.

john4wd

Wow dude awesome score, looks great!!!!

Outsane

now you know who is taking all the good stuff

RBX

I haven't mounted it yet its just sitting there.

Actually, i went to the yard just because i hadn'y been in a while and there were a few small things i could use. However, not one Yota truck, not even a 2nd gen Runner in the place. Then i spotted the rack on top of a minivan. took a prybar to the factory rails, and worked it loose.

thanks guys

RMA

looks good man ! can you do me a favor and take some pics of the way the mounting system works on the inside of that top ..

thanks .

RBX

yea, our yards here have all the 3rds yanked, once in a while you get lucky. Skinner recently scored 4:88s.

RBX

RMA,
The not sure what you mean. My Can-Back has the bars tied into the frame and then i will mount the rack to the CanBack crossbars. I'll snap some shots of the interior.

thx

RBX

Can-Back Frame Roof Rack Mounting System
Hope this helps

RBX

While i was vacationing this summer, my rear window failed to roll down. I have the soft top on and always forget to lock the tailgate until i am driving down the road. I will put the rear window up enough to lock the tailgate, then put it back down. I also defeated the Cover Top switch, as described be 4Crawler.
After further inspection i found my computer was compromised by moisture, and the Power Window Relay computer, was not reliable.
Here is how i bypassed the computer using two SPDT relays:



Note:
I have been modifying some wiring on my rig, and try to update a wire schematic so if i need to troubleshoot, i can refer to the above drawing, once i have forgotten what i did 'x' years ago. Which is why you see the factory wiring mixed into the modified schematic.

Outsane

Rear brake conversion?

RBX

^^^ couple pages back, post 787

RBX

Replaced my Ilder Arm yesterday, solved most of my slight shimmy in the front. Next will be the Pitman Arm and then the wheel bearings.

My front brakes a still a bit sloppy after changing the pads and rotors Monday. yesterday i picked up new front brake hoses, hoping that the old hoses are expanding and creating the slop. I that doesn't solve the sloppy feel, i am stumped since the only thing i haven't replaced is the dual diaphragm booster.

irab88

iTrader: (4)

for an e-brake:

http://www.caravanaccessoriesshop.co...iper-cent-pull



~$103 shipped to the us.

RBX

Thanks Ian, but this is cheaper and available in the states, i currently have one, just need to fab a bracket.

dropzone

iTrader: (6)

Which e brake kit did you go with?
Edit-nevermind found it...

RBX

Not really a kit, i bought the caliper and will need to mount it to the t-case. I have a concept that should work by using the stock e-brake cable(front half) similar to the sky/trail-gear, but not as bulky.

irab88

iTrader: (4)

got it. next time, i'll just read the thread

i'll see the set-up this weekend. might look into this swap.

RBX

no you wont see it this weekend, cuz i don't have it mounted yet, i may bring the caliper though, so we can have some camp-fire brainstorming.