Nuttynu's Pickup build thread
#181
Registered User
Thread Starter
Picked up an 86 runner today.
Good engine. But bell housing shot, and slave cylinder bad. Body is kinda bad, careless about cosmetic .$200 you can't beat it.
http://www.flickr.com/photos/104250693@N07/12125758794/
http://www.flickr.com/photos/104250693@N07/12125632813/
http://www.flickr.com/photos/104250693@N07/12126012016/
http://www.flickr.com/photos/104250693@N07/12125625973/
I wi use this to learn more about the toyotas .break ˟˟˟˟˟ and fix !
http://www.flickr.com/photos/104250693@N07/12125758794/
http://www.flickr.com/photos/104250693@N07/12125632813/
http://www.flickr.com/photos/104250693@N07/12126012016/
http://www.flickr.com/photos/104250693@N07/12125625973/
I wi use this to learn more about the toyotas .break ˟˟˟˟˟ and fix !
#184
Registered User
Thread Starter
bus busy.. runner, axles and got some 33's for spares...
well its now cold again in alaska .
currently just planning to sell the 86 4runner since i have no time to work on it..and kinda of don't want too anyways .
recently pick up a front axles off another 4runner, haven't done much. just took of the knuckles and learning more about it. planning to rebuild it slowly.
lucky score on the local craiglists today!! super excited, picked up two 33's general AT2 already on 6 lug wheels…. guess how much??
got it both for $1001
currently just planning to sell the 86 4runner since i have no time to work on it..and kinda of don't want too anyways .
recently pick up a front axles off another 4runner, haven't done much. just took of the knuckles and learning more about it. planning to rebuild it slowly.
lucky score on the local craiglists today!! super excited, picked up two 33's general AT2 already on 6 lug wheels…. guess how much??
got it both for $1001
#185
Registered User
Thread Starter
bus busy.. runner, axles and got some 33's for spares...
well its now cold again in alaska .
currently just planning to sell the 86 4runner since i have no time to work on it..and kinda of don't want too anyways .
recently pick up a front axles off another 4runner, haven't done much. just took of the knuckles and learning more about it. planning to rebuild it slowly.
lucky score on the local craiglists today!! super excited, picked up two 33's general AT2 already on 6 lug wheels…. guess how much??
got it both for $100 bucks !!!
they are new too , owner said it was under 1k miles.. some punks slashed two of the other ones
I'll be planning to use these two for spares…
well be rotating my tires tomorrow , so ill slap these on and see how they look and what not. they are on 15x10 and same backspacing as what i have there on now, 4.5" i believe.
Then we picked up a 3.4 for a buddy .. yup fun stuff...
oh and i sold my topper shield!! going to miss it , but didn't need it anymore as well since i'll be needing the back to haul my meat trailer for the upcoming hunting season.
Truck does look more different now and somewhat bulky looking,i like it tho.
http://www.flickr.com/photos/104250693@N07/12317246484/http://www.flickr.com/photos/104250693@N07/12317245954/
http://www.flickr.com/photos/104250693@N07/12317245224/
http://www.flickr.com/photos/104250693@N07/12316970043/
http://www.flickr.com/photos/104250693@N07/12316814765/
http://www.flickr.com/photos/104250693@N07/12317243754/
[url=http://www.flickr.com/photos/104250693@N07/12316814155/][/url
http://www.flickr.com/photos/104250693@N07/12317243004/http://www.flickr.com/photos/104250693@N07/12316813265/
http://www.flickr.com/photos/104250693@N07/12316812415/http://www.flickr.com/photos/104250693@N07/12316812035/
currently just planning to sell the 86 4runner since i have no time to work on it..and kinda of don't want too anyways .
recently pick up a front axles off another 4runner, haven't done much. just took of the knuckles and learning more about it. planning to rebuild it slowly.
lucky score on the local craiglists today!! super excited, picked up two 33's general AT2 already on 6 lug wheels…. guess how much??
got it both for $100 bucks !!!
they are new too , owner said it was under 1k miles.. some punks slashed two of the other ones
I'll be planning to use these two for spares…
well be rotating my tires tomorrow , so ill slap these on and see how they look and what not. they are on 15x10 and same backspacing as what i have there on now, 4.5" i believe.
Then we picked up a 3.4 for a buddy .. yup fun stuff...
oh and i sold my topper shield!! going to miss it , but didn't need it anymore as well since i'll be needing the back to haul my meat trailer for the upcoming hunting season.
Truck does look more different now and somewhat bulky looking,i like it tho.
http://www.flickr.com/photos/104250693@N07/12317246484/http://www.flickr.com/photos/104250693@N07/12317245954/
http://www.flickr.com/photos/104250693@N07/12317245224/
http://www.flickr.com/photos/104250693@N07/12316970043/
http://www.flickr.com/photos/104250693@N07/12316814765/
http://www.flickr.com/photos/104250693@N07/12317243754/
[url=http://www.flickr.com/photos/104250693@N07/12316814155/][/url
http://www.flickr.com/photos/104250693@N07/12317243004/http://www.flickr.com/photos/104250693@N07/12316813265/
http://www.flickr.com/photos/104250693@N07/12316812415/http://www.flickr.com/photos/104250693@N07/12316812035/
#187
Registered User
Thread Starter
ADD Swap out to Aisin manual hubs
kept my Aisin front eh runner and planning to swap out the ADD system ,
first time rebuilding them and oh weeeeeee. wear gloves and have a loooot of towel/paper.
all the cleaning is done, just need to paint the knob red, and wait till the gaskets arrive at the local dealership. should be able to swap them out this week.
for a first timer, i took my sweet time , about 2 1/2 hours cleaning and painting em. Followed some write up to guide me thru. this is deff easy to do. can't wait to get them on.
BEFORE:
http://www.flickr.com/photos/104250693@N07/12470068453/
http://www.flickr.com/photos/104250693@N07/12470401164/
http://www.flickr.com/photos/104250693@N07/12494321523/
AFTER:
http://www.flickr.com/photos/104250693@N07/12494320743/
http://www.flickr.com/photos/104250693@N07/12494318693/
http://www.flickr.com/photos/104250693@N07/12494316803/
http://www.flickr.com/photos/104250693@N07/12494315473/
they'll look hot once in red coat.
http://www.flickr.com/photos/104250693@N07/12494189825/
http://www.flickr.com/photos/104250693@N07/12494185985/
http://www.flickr.com/photos/104250693@N07/12494184555/
http://www.flickr.com/photos/104250693@N07/12494183195/
first time rebuilding them and oh weeeeeee. wear gloves and have a loooot of towel/paper.
all the cleaning is done, just need to paint the knob red, and wait till the gaskets arrive at the local dealership. should be able to swap them out this week.
for a first timer, i took my sweet time , about 2 1/2 hours cleaning and painting em. Followed some write up to guide me thru. this is deff easy to do. can't wait to get them on.
BEFORE:
http://www.flickr.com/photos/104250693@N07/12470068453/
http://www.flickr.com/photos/104250693@N07/12470401164/
http://www.flickr.com/photos/104250693@N07/12494321523/
AFTER:
http://www.flickr.com/photos/104250693@N07/12494320743/
http://www.flickr.com/photos/104250693@N07/12494318693/
http://www.flickr.com/photos/104250693@N07/12494316803/
http://www.flickr.com/photos/104250693@N07/12494315473/
they'll look hot once in red coat.
http://www.flickr.com/photos/104250693@N07/12494189825/
http://www.flickr.com/photos/104250693@N07/12494185985/
http://www.flickr.com/photos/104250693@N07/12494184555/
http://www.flickr.com/photos/104250693@N07/12494183195/
Last edited by nuttynu; 02-12-2014 at 10:04 PM.
#189
Registered User
Thread Starter
Nothin much ,
Just swap out my air filter housing back to a stock one that isn't drilled out.
Gasket for the AISIN came in and got the manual hubs in. Can't tell any difference yet or in mpg . Well see.
Pick up a new toy this week. A stealth fighter.
http://www.flickr.com/photos/104250693@N07/12763268295/
http://www.flickr.com/photos/104250693@N07/12763422873/
http://www.flickr.com/photos/104250693@N07/12763730674/
http://www.flickr.com/photos/104250693@N07/12763463453/
Just swap out my air filter housing back to a stock one that isn't drilled out.
Gasket for the AISIN came in and got the manual hubs in. Can't tell any difference yet or in mpg . Well see.
Pick up a new toy this week. A stealth fighter.
http://www.flickr.com/photos/104250693@N07/12763268295/
http://www.flickr.com/photos/104250693@N07/12763422873/
http://www.flickr.com/photos/104250693@N07/12763730674/
http://www.flickr.com/photos/104250693@N07/12763463453/
#190
Registered User
Thread Starter
Asin feedback, well so far the manual hub seems to make the truck a bit smoother and somewhat a slight increase on mpg. Not to dramatic, the CV axles will need replace soon anyways, cracks are appearing. Planning to do it soon in the next few weeks. With warmer weather , the extra gravel bags used for traction was taken off , so that may had help too .
Other than that, not much mod in the making. Still thinking about a winch system and some rock sliders
http://www.flickr.com/photos/104250693@N07/12851665035/
http://www.flickr.com/photos/104250693@N07/12851764795/
http://www.flickr.com/photos/104250693@N07/12851719415/
http://www.flickr.com/photos/104250693@N07/12852109624/
http://www.flickr.com/photos/104250693@N07/12852092184/
http://www.flickr.com/photos/104250693@N07/12851677645/
Other than that, not much mod in the making. Still thinking about a winch system and some rock sliders
http://www.flickr.com/photos/104250693@N07/12851665035/
http://www.flickr.com/photos/104250693@N07/12851764795/
http://www.flickr.com/photos/104250693@N07/12851719415/
http://www.flickr.com/photos/104250693@N07/12852109624/
http://www.flickr.com/photos/104250693@N07/12852092184/
http://www.flickr.com/photos/104250693@N07/12851677645/
Last edited by nuttynu; 03-01-2014 at 01:54 AM.
#191
Registered User
I would just get new CV boots for your existing axles. They're much cheaper and you keep the strength of your factory axles. To change the boots out is only about another 12-15 minutes per axle. Just make sure to matchmark everything on the axle so it goes back together exactly as it was taken apart.
Oh, and sweet job on the Aisin swap. That was one of my most favorite mods, not just because of the benefits, but because they're so darn fun to rebuild
Oh, and sweet job on the Aisin swap. That was one of my most favorite mods, not just because of the benefits, but because they're so darn fun to rebuild
Last edited by 93Xtra-Cab; 03-01-2014 at 03:39 AM.
#192
Registered User
Thread Starter
Thanks . I have another axle layof around. I'll see how swapping the boot goes. That may be the best way to go too.
And yeah the hubs were nice to work on. Just workin with grease is nasty tho.
And yeah the hubs were nice to work on. Just workin with grease is nasty tho.
#193
Registered User
Thread Starter
20141005_132726 by nuttynu.rider, on Flickr
Pretty amazing simmer in alaska. Haven't posted much. But the yota has change much.
#195
Registered User
Thread Starter
#197
Registered User
nice truck bud, what size springs did you go with on the zuk mod? 13s?. Im lookin to do that just to get my leafs a lil more support and am runnin the same bilstein 4600s
EDIT- Saw in Sig, thanks
EDIT- Saw in Sig, thanks
Last edited by YotiBerra; 11-21-2015 at 08:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
tpd143
General Vehicle Related Topics (Non Year Related)
1
07-07-2015 09:06 AM