Mak92-4RnR's 1992 4Runner Build-Up Thread
#101
Registered User
Thread Starter
gonna do my best without completely polishing the turd... I just want it to last into the 225k range... roughly... even more would be great. I hardly rev my 3.0 ( only sees 3k shifts on a daily basis ) and occasionally i'll push it to 4.2-4.5k when im wanting to hear the roar... plus i have headers so I shouldn't have to worry about the head gasket.
#103
Registered User
Thread Starter
yeah I took my BOSCH plugs back to kragen and got the iridium IX ones... lol probably overkill but whatever. not im looking at buying NGK wire set, and Denso Cap and rotor.
#108
Registered User
Thread Starter
#109
Registered User
Thread Starter
#111
Registered User
Thread Starter
got it all written down on a notepad near my desk lol
plans for lift:
SDORI - Ball joint spacers 1.5" (2) for 90-95 4runner - BJS1
OLD MAN EMU - Front Shocks (2) for 90-95 4Runner - OMEN98
OLD MAN EMU - Rear Shocks (2) for 90-95 4Runner - OMEN72F
OLD MAN EMU - Heavy Load Rear Coil Springs (2) OME901
OLD MAN EMU - Steering Stabilizer for 90-95 4Runner - OMESD33
Body lift ( Maybe ):
2" RB (4crawler) body lift
other options:
Total chaos long travel in front ( expensive and doubtful )
plans for lift:
SDORI - Ball joint spacers 1.5" (2) for 90-95 4runner - BJS1
OLD MAN EMU - Front Shocks (2) for 90-95 4Runner - OMEN98
OLD MAN EMU - Rear Shocks (2) for 90-95 4Runner - OMEN72F
OLD MAN EMU - Heavy Load Rear Coil Springs (2) OME901
OLD MAN EMU - Steering Stabilizer for 90-95 4Runner - OMESD33
Body lift ( Maybe ):
2" RB (4crawler) body lift
other options:
Total chaos long travel in front ( expensive and doubtful )
#114
Registered User
Thread Starter
i've actually considered Total chaos long travel... the only thing "welded" is the shock hoop. So im pretty confident I could accomplish it. but like everyone says with the TC kit... the price is hella much.
#115
Registered User
#117
Registered User
Thread Starter
Went over to 93yotaSR5s house and got some stuff done. optima battery mount is now mounted. I was hoping that a diehard platinum would fit in it but it doesn't. so no fancy battery yet. i just wanted to mount it today.
Also got the CB radio fixed with a new fuse holder and fuse just need to get it tuned again and it should be set.
Also got the CB radio fixed with a new fuse holder and fuse just need to get it tuned again and it should be set.
#119
Registered User
Thread Starter
the gears are waiting patiently to be put in. I'll be ordering the lockers here soon. I'm prepping my truck to go to the pismo jamboree this year. i'll have a new radiator, cv joints, lockers, 4.88 gearing, and hopefully an optima battery with some hella 700ffs on the front with 4k HIDs.
#120
Registered User
Thread Starter
I got my CB radio working so, I figured i'd finish the setup and order my PA system. Heres what I ordered.
from:
www.walcottcb.com
http://www.walcottcb.com/spc15r-pa-h...l?cPath=221_32
from:
www.walcottcb.com
http://www.walcottcb.com/spc15r-pa-h...l?cPath=221_32