Mak92-4RnR's 1988 4Runner Build
#161
Looks good!
Bet that 2nd gen v8 4runner was badass! I follow that guy on instagram
Bet that 2nd gen v8 4runner was badass! I follow that guy on instagram
#163
Registered User
Thread Starter
Hey Chris, Bryan's bumper is a custom built unit. but I believe it uses the trail-gear winch plate.
#168
Registered User
Thread Starter
Of course it is. Why wouldn't it be? lol
Nope. I love having a removable top that has never come off. haha
You could, but the pick up you have is iconic. they're getting pretty hard to find.
Would be nice! All the Yotatech OGs have fallen off the face of the map.
Nope. I love having a removable top that has never come off. haha
Would be nice! All the Yotatech OGs have fallen off the face of the map.
#170
Registered User
Thread Starter
I agree, we need to plan a trip to grab some beer and pizza.... something along those lines. Even a quick camping trip would be ideal to get everyone together again.
#174
Registered User
Thread Starter
#176
#177
Registered User
Thread Starter
Gave the 4Runner some love today. The 3vz intake elbow is now a discontinued part and is no longer available through second hand auto part stores and it's $100+ at Toyota. With that being said, I improvised.
The one that was on the truck tore at one of the ribs which was causing unfiltered/unmetered air.
I had some spare material lying around and this is what I came up with with some silicone couplers and aluminum tubing.
What's everyone think?
The one that was on the truck tore at one of the ribs which was causing unfiltered/unmetered air.
I had some spare material lying around and this is what I came up with with some silicone couplers and aluminum tubing.
What's everyone think?
Last edited by MaK92-4RnR; 01-29-2017 at 07:12 PM.
#178
+10hp easy
hah looks clean
hah looks clean
#179
Registered User
Join Date: Jan 2015
Location: Hendersonville NC
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
#180
Registered User
Thread Starter
If it was, i'd sell them. LOL
Work still needs to be done to it for the crankcase recycle. It's currently attached to an open element for now since i didn't have any wire for the welder. I thought about leaving it silver, but i had time and spray paint lying around. Thought about getting it anodized/powdered.
Work still needs to be done to it for the crankcase recycle. It's currently attached to an open element for now since i didn't have any wire for the welder. I thought about leaving it silver, but i had time and spray paint lying around. Thought about getting it anodized/powdered.