aalba92691's 1988 Pickup Build-Up Thread
#261
Registered User
Join Date: Jul 2008
Location: Chula Vista, Ca
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
aalba,
Hows the bump steer with the Blazeland kit while driving? Right now I just have ball joint spacers and almost want to take them off because of the added bump steer.
Hows the bump steer with the Blazeland kit while driving? Right now I just have ball joint spacers and almost want to take them off because of the added bump steer.
#262
Registered User
Fordota Jumps
I jumped the Fordota a few times back in 2004, before the Blazeland Creation (BC). In the photos I had a Supelift bracket kit with Rancho mid travel UCAs. It cycled about 11" of travel. For dampening it had the Downey Double shock hoops with Bilsteins. It held up on this jump, I jumped it a dozen times or so, but the landing was really mellow and I only got a couple of feet of air.
Just so everyone knows the Blazeland LT is not engineered for jumping and hardcore pre-running. The dynamic loads are far too unpredictable to calculate. It may hold up, it may not?
FYI- There is no warranty stated or implied for the Blazeland LT. There is however a liability release form.
Just so everyone knows the Blazeland LT is not engineered for jumping and hardcore pre-running. The dynamic loads are far too unpredictable to calculate. It may hold up, it may not?
FYI- There is no warranty stated or implied for the Blazeland LT. There is however a liability release form.
Last edited by BlazeN8; 11-24-2009 at 07:09 PM.
#263
Registered User
Thread Starter
There is no difference in steering wheel feedback since I put the Blazeland kit on. The truck aligned perfectly and drives great....!
#264
Registered User
Thread Starter
#265
Registered User
Just so everyone knows the Blazeland LT is not engineered for jumping and hardcore pre-running. The dynamic loads are far too unpredictable to calculate. It may hold up, it may not?
FYI- There is no warranty stated or implied for the Blazeland LT. There is however a liability release form.
Duly noted.
Last edited by Bako88; 11-24-2009 at 07:24 PM.
#266
Contributing Member
Damn the ranger in post 251 flew like a mile man...
Blazen8 after seeing the videos beening posted here I would have said the same thing man..
This kit looks good , I like it..
Blazen8 after seeing the videos beening posted here I would have said the same thing man..
This kit looks good , I like it..
#267
Registered User
#268
Registered User
Thread Starter
#269
Contributing Member
#270
Contributing Member
Congrats on the install man looks good, good luck with it.
#271
Registered User
Hey Superbleeder,
You know me I am a NUB! Actually not sure what your talking about with a link in my sig? By the way I really liked the animation sequence you made of the three pictures of the suspension jig. I need to make a video of that or at least a better sequence one with a camera tripod and a dozen stills instead of just three. A few readers called me on bumpsteer, I blame it on my amature photography.
I have a few new still frame animation sequences I'd like to send you. If your intersted in doing some more graphic design work hit me up with a PM with your phone number.
Nate
You know me I am a NUB! Actually not sure what your talking about with a link in my sig? By the way I really liked the animation sequence you made of the three pictures of the suspension jig. I need to make a video of that or at least a better sequence one with a camera tripod and a dozen stills instead of just three. A few readers called me on bumpsteer, I blame it on my amature photography.
I have a few new still frame animation sequences I'd like to send you. If your intersted in doing some more graphic design work hit me up with a PM with your phone number.
Nate
#272
Contributing Member
Hey Superbleeder,
You know me I am a NUB! Actually not sure what your talking about with a link in my sig? By the way I really liked the animation sequence you made of the three pictures of the suspension jig. I need to make a video of that or at least a better sequence one with a camera tripod and a dozen stills instead of just three. A few readers called me on bumpsteer, I blame it on my amature photography.
I have a few new still frame animation sequences I'd like to send you. If your intersted in doing some more graphic design work hit me up with a PM with your phone number.
Nate
You know me I am a NUB! Actually not sure what your talking about with a link in my sig? By the way I really liked the animation sequence you made of the three pictures of the suspension jig. I need to make a video of that or at least a better sequence one with a camera tripod and a dozen stills instead of just three. A few readers called me on bumpsteer, I blame it on my amature photography.
I have a few new still frame animation sequences I'd like to send you. If your intersted in doing some more graphic design work hit me up with a PM with your phone number.
Nate
yeah man I do nothing most afternoons, and can knock out an animation in no time, lol. I'll send you a PM
#273
Registered User
#274
Nate, I personally won't buy one until at least one has been tested to its limit as I want to have an idea where that limit is. Maybe you could install one on a beater and test it to destruction, on video of course. Was the design strength calculated at all, or just "guess and (no) check"?
I don't mean to be a wet rag, but I wouldn't want to be in the truck when the LCA snaps at 60mph because I hit a pothole. I'm not implying there is anything wrong with your product, its just seems very untested to be releasing into the market. Correct me if I'm wrong.
I don't mean to be a wet rag, but I wouldn't want to be in the truck when the LCA snaps at 60mph because I hit a pothole. I'm not implying there is anything wrong with your product, its just seems very untested to be releasing into the market. Correct me if I'm wrong.
Last edited by Matt16; 11-25-2009 at 01:30 AM.
#275
Registered User
Join Date: Sep 2007
Location: Arizona
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
im no nate but did you read the other thread about his kit? it states pretty mucheverything that has ever been asked
#276
Registered User
Test it to destruction...that would be a video to see! There are a couple of year appropriate junkers sitting on the property in Ocotilla that have been stripped, but they are still rollers. Maybe the slaw dog boys would bolt on the Blazeland LT fill the bed and engine compartment with sand, tow it up a big hill (with lots of whoops) and ghost ride it down.
Back to reality..... do you know what the limits are on a stock truck? Does man ever really know the limits on anything he builds. Airplanes crash, bridges fail, space shuttle explodes, Grave Digger grenades a planetary. In all probability your more likely to crash your truck because you fell to sleep at the wheel or had one to many beers.
Here is what I always do after a weekend of bouncing around in the desert. Inspect everything before hitting the road. Air up to the proper tire pressure. Drive mellow on the pavement for a few miles. Listen for unusual noises. Keep an eye on the gauges. Make a visual note on ride height. Is anything drooping or sagging? Get a sense of feel for the vehicle. If something is bent or broken most likely the vehicle wont track straight. Just use your common sense and most likely you will be able to spot a problem. Carry spare parts, fluids, and tools. Be prepared.
Back to reality..... do you know what the limits are on a stock truck? Does man ever really know the limits on anything he builds. Airplanes crash, bridges fail, space shuttle explodes, Grave Digger grenades a planetary. In all probability your more likely to crash your truck because you fell to sleep at the wheel or had one to many beers.
Here is what I always do after a weekend of bouncing around in the desert. Inspect everything before hitting the road. Air up to the proper tire pressure. Drive mellow on the pavement for a few miles. Listen for unusual noises. Keep an eye on the gauges. Make a visual note on ride height. Is anything drooping or sagging? Get a sense of feel for the vehicle. If something is bent or broken most likely the vehicle wont track straight. Just use your common sense and most likely you will be able to spot a problem. Carry spare parts, fluids, and tools. Be prepared.
Nate, I personally won't buy one until at least one has been tested to its limit as I want to have an idea where that limit is. Maybe you could install one on a beater and test it to destruction, on video of course. Was the design strength calculated at all, or just "guess and (no) check"?
I don't mean to be a wet rag, but I wouldn't want to be in the truck when the LCA snaps at 60mph because I hit a pothole. I'm not implying there is anything wrong with your product, its just seems very untested to be releasing into the market. Correct me if I'm wrong.
I don't mean to be a wet rag, but I wouldn't want to be in the truck when the LCA snaps at 60mph because I hit a pothole. I'm not implying there is anything wrong with your product, its just seems very untested to be releasing into the market. Correct me if I'm wrong.
Last edited by BlazeN8; 11-26-2009 at 10:23 AM.
#277
Registered User
Join Date: Sep 2007
Location: Arizona
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
Test it to destruction...that would be a video to see! There are a couple of year appropriate junkers sitting on the property in Ocotilla that have been stripped, but they are still rollers. Maybe the slaw dog boys would bolt on the Blazeland LT fill the bed and engine compartment with sand, tow it up a big hill (with lots of whoops) and gost ride it down.
Back to reality..... do you know what the limits are on a stock truck? Does man ever really know the limits on anything he builds. Airplanes crash, bridges fail, space shuttle explodes, Grave Digger grenades a planetary. In all probability your more likely to crash your truck because you fell to sleep at the wheel or had one to many beers.
Here is what I always do after a weekend of bouncing around in the desert. Inspect everything before hitting the road. Air up to the proper tire pressure. Drive mellow on the pavement for a few miles. Listen for unusual noises. Keep an eye on the gauges. Make a visual note on ride height. Is anything drooping or sagging? Get a sense of feel for the vehicle. If something is bent or broken most likely the vehicle wont track straight. Just use your common sense and most likely you will be able to spot a problem. Carry spare parts, fluids, and tools. Be prepared.
Back to reality..... do you know what the limits are on a stock truck? Does man ever really know the limits on anything he builds. Airplanes crash, bridges fail, space shuttle explodes, Grave Digger grenades a planetary. In all probability your more likely to crash your truck because you fell to sleep at the wheel or had one to many beers.
Here is what I always do after a weekend of bouncing around in the desert. Inspect everything before hitting the road. Air up to the proper tire pressure. Drive mellow on the pavement for a few miles. Listen for unusual noises. Keep an eye on the gauges. Make a visual note on ride height. Is anything drooping or sagging? Get a sense of feel for the vehicle. If something is bent or broken most likely the vehicle wont track straight. Just use your common sense and most likely you will be able to spot a problem. Carry spare parts, fluids, and tools. Be prepared.
p.s. ill be contacting you soon!
#278
My first truck was a Ranger, I loved it. Don't trash talk Rangers when they've been proven in the deserts for 20+ years. But now that I'm converted to Toyotas, I don't think I'd ever go back to a Ranger unless times got desperate cause Rangers are a dime a dozen.
Hey "91 TOYOTA 4x4", I went to school with your buddy Mike I think. He has a 2 door black 4runner? You live in the Lower Mainland?
Hey "91 TOYOTA 4x4", I went to school with your buddy Mike I think. He has a 2 door black 4runner? You live in the Lower Mainland?
#279
Registered User
I would love to try this on my 4runner... a softer ride would be sweet. Maybe i'll be the next cantidate when the money situation starts to correct itself. hahah
#280
Registered User
My first truck was a Ranger, I loved it. Don't trash talk Rangers when they've been proven in the deserts for 20+ years. But now that I'm converted to Toyotas, I don't think I'd ever go back to a Ranger unless times got desperate cause Rangers are a dime a dozen.
Hey "91 TOYOTA 4x4", I went to school with your buddy Mike I think. He has a 2 door black 4runner? You live in the Lower Mainland?
Hey "91 TOYOTA 4x4", I went to school with your buddy Mike I think. He has a 2 door black 4runner? You live in the Lower Mainland?
Last edited by 91_TOYOTA_4x4; 11-26-2009 at 02:59 PM.