89silverpu's 1989 Pickup Build-Up Thread
#245
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
No, didn't have to move it....it rides pretty good, definitely a bit more bumpy, but it's a truck, and I can live with how it drives on road cause offroad it is 100 times better.
Thanks! That's what I'm hoping!
Thanks man!
So I ran in to an interesting problem...the spring perches on my axle (which are stock spring perches) seem to be of some rare extra wide sort so the TG flip kit does not fit properly. I spoke with a tech from trail gear and sent him pictures and some measurements and he said that he has never even seen Toyota spring perches that are 3 inches wide....so for now I am going to continue using the stock ubolt kit and return the TG one and have something custom made, or make something myself in the future.
So basically just wanted to let people know that before they order a flip kit, go out and measure how wide your spring perches are, because if they are about 3 inches, it won't work.
Thanks man!
So I ran in to an interesting problem...the spring perches on my axle (which are stock spring perches) seem to be of some rare extra wide sort so the TG flip kit does not fit properly. I spoke with a tech from trail gear and sent him pictures and some measurements and he said that he has never even seen Toyota spring perches that are 3 inches wide....so for now I am going to continue using the stock ubolt kit and return the TG one and have something custom made, or make something myself in the future.
So basically just wanted to let people know that before they order a flip kit, go out and measure how wide your spring perches are, because if they are about 3 inches, it won't work.
#247
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Not planning on it right now....if I ever wanted to move the axle like 3 inches forward it would most likely have to be moved, but the steering is perfectly fine the way it is with the box in the stock location. I am planning on moving the axle an inch forward and don't anticipate any problems with the stock location.
#250
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
I ended up not going with the free 36's...I got some 35" Pro Comp Mud Terrains...but so far it's not horrible, but I haven't been on a long free way drive yet...tomorrow I drive from Vegas to Irvine, CA...I have a feeling it's gunna be a slow trip haha I would definitely switch to 5.29's if I had the extra money layinhg around.
Thanks man, good luck with your swap!
Thanks man, good luck with your swap!
#252
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
#254
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man, I like the way it turned out, still waiting for the front to settle a bit though...I removed the third leaf spring of the front pack and moved the axle an inch forward so I'm liking the way it is sitting more but the front still needs to settle a bit. Unfortunately, I am open in the front for now...I am telling myself that I'm going to wait until I can afford an ARB for the front, but I may break down and throw an Aussie in the front sometime in the future.
#257
Registered User
Thread Starter
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM