1986yota4x4's 1986 Pickup Build-Up Thread
#586
Registered User
Join Date: Mar 2009
Location: (LSD) Lower Slower Delaware
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
#590
Registered User
Thread Starter
haha get my machine work done on my block and its all yours and update, motor is out and torn down, needs a rebuild again, rod bearings were about to go, headgasket was about to blow, and my pistons were really loose in the cylinders, gonna have it bored, crank polished, gonna build it the way i wanted it, not cutting any corners this time, did a compression test before rebuild and all cylinders were below 50 psi
#595
Registered User
Thread Starter
yea, in a way kinda glad it did, building it how i want it, bored, cammed, head shaved, weber, header, dual row timing, dome top pistons, gonna be a hot little engine
#598
Super Moderator
Staff
iTrader: (1)
Join Date: Aug 2008
Location: Anderson Missouri
Posts: 11,788
Likes: 0
Received 25 Likes
on
22 Posts
On the new bed you are getting, I would suggest pulling the inner panels and cleaning the dirt and mud that builds up there, that is why they are always rusted in wheel well area. Those panels have such big gaps, anything that finds its way in there cant get out.
Hope the rebuild goes well for you.
Hope the rebuild goes well for you.