my 82 rust bucket
#1
Registered User
Thread Starter
Join Date: Jun 2011
Location: fort riley
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
my 82 rust bucket
Got a 82 Toyota on a 79 frame
Has a weber carb 3 inch lift on 33's
The down fall is the rear end is Lincoln locked.
I plan on liftin her
Get rid of the rust
And haven't decided to replace the bed or
Build a flat bed
A little about me
In the army just got back from afgan
Had a 88 for a while got rid of it now wanted to get back into the yota world!
Has a weber carb 3 inch lift on 33's
The down fall is the rear end is Lincoln locked.
I plan on liftin her
Get rid of the rust
And haven't decided to replace the bed or
Build a flat bed
A little about me
In the army just got back from afgan
Had a 88 for a while got rid of it now wanted to get back into the yota world!
#5
Registered User
Join Date: Jan 2011
Location: Memphis, TN
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Thread Starter
Join Date: Jun 2011
Location: fort riley
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I don't like the fact you always engaged so going around turn tears up tires, and makes it difficult to turn. I had a buddy whos jeep was Lincoln locked and got on it in gravel and then went onto pavement snapped a axle shaft didn't realize it for a couple days. can be very dangerous. if its strictly a toy I could understand but I wanna be able to d/d this truck if I have to.
Trending Topics
#9
Registered User
Thread Starter
Join Date: Jun 2011
Location: fort riley
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
my fenders came in today, broke a couple bolts didn't have time to go to the parts store so I replace them when I get her panted, fenders didn't come with a antenna hole gonna try cb antenna look when I replace the radio. Also just gotta do some trimming on the front of the fender.
#10
Super Moderator
Staff
iTrader: (1)
Join Date: Aug 2008
Location: Anderson Missouri
Posts: 11,788
Likes: 0
Received 25 Likes
on
22 Posts
Welcome to Yotatech and it is looking like you are getting alot of the rust out. I got to go camping in the deserts a couple of times my self. Was at Riley a while back and didnt see many Toyotas up there. Looking forward to your build.
#12
Registered User
Thread Starter
Join Date: Jun 2011
Location: fort riley
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
So I'm stilling trying to figure out the bed issue, to either replace or build a flat bed what's a replacement bed running theses haven't had any real luck find them in the classifieds
#13
#14
I ended up buying my bed from Corey at ToyotaFiberglass.com. The price is steep and may not be worth it to you unless you are doing a full restoration like I am (and obviously have the money). Mine came up to roughly $3,200 shipped. That includes the shortbed, tailgate, tailgate hardware fuel door and mounting hardware. All I should have to do is paint it, install the tail lights and bolt it on. I've heard nothing but good about his products and I know that the longevity will far exceed any restored original steel bed. It does take a while to get a bed from him because he is so backed up with orders, but from my experience so far the guy is really great to do business with - He truly believes in his products. My bed was actually shipped out last week and should be here in a couple days. I plan on posting pictures and a thorough review of the bed upon receiving it so people know just what they are getting - I'm almost certain that it will meet AND exceed all of my expectations.
#18
Registered User