Parting out 1992 and 1993 V6 4Runners Winnipeg, MB
#21
No problem, I'm sure they would have worked but I'd rather you spend your money elsewhere and get a better part.
The grey 1993 is gone so all that is left from it are the engine parts pictured earlier. I'll be tearing into the black 1992 this weekend.
The grey 1993 is gone so all that is left from it are the engine parts pictured earlier. I'll be tearing into the black 1992 this weekend.
Last edited by 99blackSE; 05-12-2013 at 06:09 AM.
#23
#24
#27
I'll try and look into this in the next few days, I've been really busy with school lately so I haven't had a chance to phone around.
Yes I do have a couple 3VZE starters, I presume by your sig that's what you are looking for?
Yes I do have a couple 3VZE starters, I presume by your sig that's what you are looking for?
#29
Is it just the gears or the whole diff. I'd prefer the whole diff, just so I don't have to take mine all apart. I just want to take the old out and put the new in. I just need the front.
Last edited by 93Xtra-Cab; 05-28-2013 at 10:06 AM.
#30
Okay I'll try and look into this tomorrow for ya. I had one with fresh contacts and checked over and tested.
Yes complete setup, unbolt the old one and bolt on the new one and go.
Yes complete setup, unbolt the old one and bolt on the new one and go.
#34
Sorry for the absence as of late, school has taken over.
No glass left sorry.
I might have a distributor still.
I might have a distributor still.
#36
I did some cleaning in the garage and I'll have list of some parts I have left that I'm trying to clear out. Will try and post it in the next day or two.
Mostly a few ECUs, Engine Builder 22RE timing chain kit that only has about 8,000 kilometres on it, 22RE fuel rail, and a few other things (VSV 4x4 solenoids, cup holder, etc.)
Mostly a few ECUs, Engine Builder 22RE timing chain kit that only has about 8,000 kilometres on it, 22RE fuel rail, and a few other things (VSV 4x4 solenoids, cup holder, etc.)
#38
What I have left last time I checked is the following:
3VZE oil pressure sensor - $25 shipped
Evap canister - $35 shipped
Rear window relay - $25 shipped
Door control relay - $25 shipped
22RE fuel rail and injectors - $50 shipped
3VZE auto throttle body /w TPS $50 shipped
Cupholder - $20 shipped
I have a few igniters as well, ECUs, 22RE Engine Builder timing chain kit with about 5,000 miles on it, and some other odds and ends I'll have to post up soon.
I still have the front 4.56 and 4.88 differentials and a 4.56 rear diff.
3VZE oil pressure sensor - $25 shipped
Evap canister - $35 shipped
Rear window relay - $25 shipped
Door control relay - $25 shipped
22RE fuel rail and injectors - $50 shipped
3VZE auto throttle body /w TPS $50 shipped
Cupholder - $20 shipped
I have a few igniters as well, ECUs, 22RE Engine Builder timing chain kit with about 5,000 miles on it, and some other odds and ends I'll have to post up soon.
I still have the front 4.56 and 4.88 differentials and a 4.56 rear diff.
Last edited by 99blackSE; 11-26-2013 at 08:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
02-15-2020 06:55 AM
smilen724
86-95 Trucks & 4Runners (Build-Up Section)
13
11-08-2015 04:11 PM