irunner

Looking for an air intake box for a 1997 4runner V6, thanks

82odyota

hw much for a grey bench shipped to 62451

Percy

Is it possible to ship a front axle to California?

pepsibluefloat

I'm looking for the Rf1A transfer case. The top shift style. Preferably 23 spline input, but i could always change that if needed.

zappa

looking for tailgate(perferabley red) front and rear bumpers with end caps painted for a 1997 4runner and vaccum control switch for 4 wheel drive

nvtoyota

need a fan pully for a v6 3vze mine is squellin bad

ultrabongo

need a front e brake cable for a 86 4R 4wd

RustBucket

iTrader: (1)

Grey (or any color, really) plastic shifter surround/bezel from 1st gen 4Runner.

jbm715

iTrader: (2)

Lots of toyota parts still available call with needs????

828-231-5715 jimmy

85runnerphx

im looking for a good throttle body for a 1985 4runner with the idle screw if u have one email me at hazeleyznick@aol.com

Lumpy

Hows about a tail gate for a 95 4runner. don't care much about the color.

yotawheelinbeast

I need the whole fuel pump bracket assembly for an 85 4runner; possible you might have this?

jbm715

iTrader: (2)

let me know what parts your needing???

xtm yota

you got a rear axle housing for a 92 pickup. if it makes a difference it 4x4 ext cab 3.0 v6

desertcamper67

This is small but do you have the plastic guide the spring that helps the tailgate come down slowly rides on? And how about the two spare tire brackets that mount on either side of the crank? Also the fuse box right behind the battery. Split rear seats and hardware(brown 1st or grey)
My truck is an '85 4Runner 22-REC.

bootown

Rear bumper cover/retainer/upper plate (96-02). Whatever you want to call it. The gray piece on the top of the rear bumper.

willia12

Do you have an original Toyota o2 sensor for a 1985 22RE 4wd truck? Thanks.

PM Sent

Andy_Structable

i could use a complete 22re fuel injection setup (ECU, manifold w/ injectors and fuel rail, intake, harness, fuel pump, and sensors) to convert a carbureted 85 truck. probably wouldn't matter which generation truck it came from. im in colorado but could think of an excuse to take a road trip if shipping is a deal breaker. if you have the setup, how much would you want?

chubbydude

I could use front and rear fender moulding for a 1990 4x4 pickup in good shape.

jbm715

iTrader: (2)

What do you need???
Call me 828-231-5715