Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

Toyota Truck & 4runner Parts "anything U Need"

Thread Tools
 
Search this Thread
 
Old 02-07-2011, 10:58 AM
  #301  
Registered User
 
atari56's Avatar
 
Join Date: Dec 2009
Location: Sacramento
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by atari56
With all mounting hardware, color doesn't matter as well as the shifter trim/dash and center console/armrest that goes between the seats. Shipped to 95833
That should be front SR5 bucket seats. Stupid mobile site iPhone browser!
Old 02-09-2011, 04:28 PM
  #302  
Registered User
 
walmic679's Avatar
 
Join Date: Feb 2011
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
3VZE in 86 yota 4x4 with IFS?

I just bought a 86 with the 22re, good engine but gutless. i wanna put the v6 in this, but dont know if the 3vze will fit with the IFS.
Any insights are helpfull. thanks guys.
Old 02-09-2011, 05:59 PM
  #303  
Registered User
 
Francis's Avatar
 
Join Date: Jul 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
I know there are many folks here that can speak with much authority about your engine options and the inherent pros and cons of each. But as a reference, I have a stock '88 with IFS and a 3zve. You may want to check some of the other threads as I think you may be looking at swapping out tranny and axles in addition to the motor mounts.
Old 02-21-2011, 03:41 PM
  #304  
Registered User
 
solowookie's Avatar
 
Join Date: Feb 2011
Location: Wyoming
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
do you have any supra coils that would work in a 91 4runner 3.slow?
Old 02-22-2011, 06:05 AM
  #305  
Registered User
 
forerunnin's Avatar
 
Join Date: Sep 2010
Posts: 25
Likes: 0
Received 1 Like on 1 Post
Looking for a good driveshaft with good u-joints shipped to 08223 thanks

Mike
Old 02-22-2011, 07:18 AM
  #306  
Fossilized
Staff
iTrader: (6)
 
dropzone's Avatar
 
Join Date: Oct 2005
Location: PNW
Posts: 19,771
Received 449 Likes on 294 Posts
Originally Posted by forerunnin
Looking for a good driveshaft with good u-joints shipped to 08223 thanks

Mike
might wanna say for what...lots of variables
Old 02-22-2011, 09:15 AM
  #307  
Registered User
iTrader: (5)
 
ChefYota4x4's Avatar
 
Join Date: Jun 2009
Location: Lake Havasu, AZ
Posts: 19,281
Received 18 Likes on 13 Posts
Originally Posted by ocdropzone
might wanna say for what...lots of variables
For 'WHAT', yes, and....don't forget 'WHICH', either, yeah? hehe...... Sup, OCDZ?

I got a good AFM from Jimmie here...... still working great, a year later!

BUMPITY! lol
Old 02-23-2011, 08:02 PM
  #308  
Registered User
 
bmcghie's Avatar
 
Join Date: Oct 2010
Location: North Vancouver, BC, Canada
Posts: 177
Likes: 0
Received 2 Likes on 2 Posts
Do you have any IFS manual hubs available still? Can you ship to Canada using USPS?

Cheers.
Old 02-26-2011, 08:59 PM
  #309  
Registered User
 
ian951's Avatar
 
Join Date: Feb 2011
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
I'm looking for grey cloth seats for a '99 Tacoma automatic 4x4, shipped to 98281. Thanks.

Last edited by ian951; 03-04-2011 at 08:59 PM.
Old 03-04-2011, 04:06 PM
  #310  
Registered User
 
skabeedoo's Avatar
 
Join Date: Mar 2011
Location: St. Charles, MO
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
i need a driver's side door for a 1983 pickup. how much to ship to st. louis area (63301)?
Old 03-06-2011, 03:38 AM
  #311  
Registered User
iTrader: (1)
 
skypilot's Avatar
 
Join Date: Sep 2010
Location: Peekskill, NY
Posts: 1,151
Likes: 0
Received 6 Likes on 6 Posts
Need 88 4runner tailgate shell

'88 4runner tailgate is rotted out, could use a good shell, or at least a good inside shell so I can put a fiberglass skin on it.
Old 03-12-2011, 09:43 AM
  #312  
Registered User
 
NisAznMonk's Avatar
 
Join Date: Nov 2004
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
tailgate bed extender for a 2001 Doublecab shipped to 32547. Thanks!
Old 03-17-2011, 06:37 PM
  #313  
Registered User
 
sfm7315's Avatar
 
Join Date: Sep 2007
Location: Ontario , Canada
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Power steering high and low pressure hoses/lines

Hello, i'm looking for high and low pressure lines for my 1998 4Runner limited4x4. Let me know if you can set me up: email here- sam.mangiapane@sympatico.ca
Old 03-20-2011, 09:15 AM
  #314  
Registered User
 
jbbeard's Avatar
 
Join Date: Mar 2011
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
ECU for my 86 turbo 4 runner

I need a 89661-35050 22R-E NE computer for my 1986 turbo 4 runner. Can Do???

Originally Posted by jbm715
TOYOTA 4 RUNNER & TRUCK PARTS "ANYTHING"

--------------------------------------------------------------------------------

I part out Toyota Trucks & 4 Runners pretty regular so I have all kinds of stuff available..

3rd Members (4.10, 4.38, 4.30, 3.58, 3.90) $150 each 2WD OR 4WD

AXLE HOUSINGS FRONT $100 REAR $50

V6 COMPLETE REAR AXLE 4.10 $300

IFS FRONT AXLE $100 (center chunk assembly)

Solid Front Axle Complete Hub To Hub $300

Rear Axle 86-95 $250

Rear Axle 79-85 $200

Calipers $65 for the set

Bench Seats $75 (blue or gray) 2WD OR 4WD

90 X-Cab Split Bench Seat with Armrest GRAY $150

4 Runner Complete Rear Seat $150 with all hardware (gray or brown)

Top Shift T-case $150 obo

4 or 5 Speed 2WD Transmissions $250

4 Runner Automatic Trans & T-case $200

w56 Transmission & T-case $400

g52 Transmission & T-case $350

22RE Complete Intake $125

Truck or 4 Runner Gas Tanks $50 each

20R Carb $75

Driveshafts FRONT $75 REAR $50

Doors $50-75 each

Fenders $50 each used or New @ $125

Hoods $50-100 depending on condition

Beds $150-300 depending on condition

Regular Cabs $300 & X-Cab $600

IFS Parts Upper Arms $40 each & Lower Arms $65 each

20R 22R & 22RE Cylinder Heads $99 each

MAF Sensors $75

20R & 22R Intake $75 each

Sliding Rear Window $65

79-83 FRAME $500

Aluminum Wheels $40 each no 16"

Steel Wheels $20 each no 16"

Tailgate $65

Locking Hubs $100 for the set (IFS or Solid)

20R 22R 22RE Exhaust Manifolds $40 each

Truck or 4 Runner Complete Wiring Harness $100 each

4 runner Tops $150 each (red, black, & camo)

Brown, Gray, Blue complete dash kits $75

Power or Manual Door Panels $25-50 each depending on which style you need (gray, beige, blue & some SR5)

2WD Front Suspension Parts (let me know what you need?)

4 Runner & Truck A/T Shifter $65

22R Oil Pan $30

22R Front Cover $50

Flywheel $50

Windshield Trim $50 for the set

Instrument Clusters $50-100, I have a 90 x-cab with TACH but thats the only tach style i have...

Power Steering Parts (tell me what you need)???

Complete Steering Columns TILT $75 & no Tilt $50

Crossmembers $50 each

84-88 Grilles Chrome or Black $60

Tacoma Grille Chrome $75

T-100 Grille Chrome $125 also have a bumper & valance available

90-95 Truck Grille $100 also have a bumper & valance available

84-88 4 Runner Interior Trim all kinds of stuff??

84-88 Truck Interior Trim all kinds of stuff??

84-88 Truck or 4 Runner Complete A/C Kit Compressor & Brackets, Evaporator, A/C Hoses, & Condenser $199

90-95 V6 Truck Complete A/C Kit Compressor & Brackets, Evaporator, A/C Hoses, & Condenser $199

Alternators & Starters $40 (let me know what you need it from)

Air Cleaner Boxes $30

Wheel Hubs Solid or IFS $30 each

You can contact me 828-231-5715....I live in Candler,NC which is 15 min WEST of Asheville,NC
Old 03-20-2011, 06:38 PM
  #315  
Registered User
 
ZAP Toyota's Avatar
 
Join Date: Mar 2011
Location: Missouri
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Do you happen to have a chrome passenger side end cap for a rear bumper on a 94 4runner sr5? and if so about how much would that run me?
Old 03-24-2011, 04:19 AM
  #316  
Registered User
 
Mastral's Avatar
 
Join Date: Nov 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
hi

Have you aisn manuals hubs for 4runner 3.0TD 27spline?

Thank

Jose

From Spain
Old 03-24-2011, 05:25 AM
  #317  
Registered User
 
trdwssrs's Avatar
 
Join Date: Jan 2009
Location: NC
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
got any shift knobs like came in my 85'? in ok-good shape?
Old 04-04-2011, 07:51 PM
  #318  
Registered User
 
Xyphus42's Avatar
 
Join Date: Mar 2011
Location: New Castle, CO
Posts: 103
Likes: 0
Received 0 Likes on 0 Posts
Would you happen to have any 3RZ cranks and rods laying around ?? and a flywheel?

Thanks
Old 04-04-2011, 08:11 PM
  #319  
Registered User
 
gray420's Avatar
 
Join Date: Dec 2006
Posts: 117
Likes: 0
Received 0 Likes on 0 Posts
Looking for 2nd gen lockset for 4runner. Need both doors and tailgate with key. I don't need ignition but I'll take it if you feel like pulling it. Shipped to 29412
Thanks
Old 04-06-2011, 11:24 AM
  #320  
Registered User
 
jeffro1112's Avatar
 
Join Date: Apr 2011
Location: western, md
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
What color is the 1990 extra cab, exterior and interior? Any pictures would be great. Where r you located by the way?


Quick Reply: Toyota Truck & 4runner Parts "anything U Need"



All times are GMT -8. The time now is 02:35 AM.