295 Nitto Terra Grapplers on a 3rd gen
#1
Contributing Member
Thread Starter
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
295 Nitto Terra Grapplers on a 3rd gen
**MODS please feel free to move this to 3rd gen...**
Well after going back and forth over and over, I finally ended up getting the Nitto Terra Grappler in 295/75/16
I have only put about 10 miles on them, but have been through the city and on the highway at 70.
Much quiter than my MT/Rs (duh).
They don't seem any taller, but they are wider.
This width seems to be the max width you can run on 16x8 with 4.5"bs without modifiying the upper control arms.
Here is a shot with the wheel turned ALL the way:
random shots:
Well after going back and forth over and over, I finally ended up getting the Nitto Terra Grappler in 295/75/16
I have only put about 10 miles on them, but have been through the city and on the highway at 70.
Much quiter than my MT/Rs (duh).
They don't seem any taller, but they are wider.
This width seems to be the max width you can run on 16x8 with 4.5"bs without modifiying the upper control arms.
Here is a shot with the wheel turned ALL the way:
random shots:
#4
Contributing Member
Thread Starter
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99_Runner
Very nice. Did you keep the MT/R's for 4Wheeling? Looks like you did.
I can only have one set of wheels/ tires.
#5
Registered User
Join Date: Jan 2004
Location: San Diego, CA
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
That looks sweet!!!
Man, that look so good with the cruiser wheels. I've been tempted in finding cruiser wheels for my Runner, but I can't justify spending more $$ on my rig. The stock ones suit me fine with what I do with the car. Maybe one of these days I'll swap the wheels from the Cruiser to see how it would look on the Runner.
Man, that look so good with the cruiser wheels. I've been tempted in finding cruiser wheels for my Runner, but I can't justify spending more $$ on my rig. The stock ones suit me fine with what I do with the car. Maybe one of these days I'll swap the wheels from the Cruiser to see how it would look on the Runner.
#6
Contributing Member
Join Date: Apr 2003
Location: Albuquerque, NM
Posts: 2,549
Likes: 0
Received 0 Likes
on
0 Posts
So, you decided...did you do any additional trimming? I had to trim the fenders and flares with 4" BS.
They look nice, and these tires wear very well.
They look nice, and these tires wear very well.
Trending Topics
#9
Contributing Member
Thread Starter
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
I have an extra set of OEM arms that will get sent to Steve.
I am not worried about a kiss or two....plus I still need to install my limiting straps and replace the cracked top out spacer
I am very happy, but they don't seem any larger than 285 MT/Rs, however i expect them to last for awhile and wear well.
I am going to try and flex them tomorrow.
i have already pounded the pinch weld and done some trimming.
I am thinking about making an inner panel to allow more clearance and elimnate the pinchweld altogether.
So far I am very happy. Quite a change though....
I am not worried about a kiss or two....plus I still need to install my limiting straps and replace the cracked top out spacer
I am very happy, but they don't seem any larger than 285 MT/Rs, however i expect them to last for awhile and wear well.
I am going to try and flex them tomorrow.
i have already pounded the pinch weld and done some trimming.
I am thinking about making an inner panel to allow more clearance and elimnate the pinchweld altogether.
So far I am very happy. Quite a change though....
#10
nicee...if you need a hand throwing that spacer in let me know. I should be ordering my BL soon too.
are you going wheeling? or mall crawling?
Id say keep the runner for a little while then get a LC, that way you will have 2 vehicles!
are you going wheeling? or mall crawling?
Id say keep the runner for a little while then get a LC, that way you will have 2 vehicles!
#11
Contributing Member
Thread Starter
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
I don't need three 4wd Toys.....maybe I do......
I am hoping to go wheeling the end of the month. Can't go Saturday b./c I have to sell the MT/Rs.
I will be back out soon. Asher is only 16 days old
I am hoping to go wheeling the end of the month. Can't go Saturday b./c I have to sell the MT/Rs.
I will be back out soon. Asher is only 16 days old
#12
Originally Posted by FilthyRich
I don't need three 4wd Toys.....maybe I do......
I am hoping to go wheeling the end of the month. Can't go Saturday b./c I have to sell the MT/Rs.
I will be back out soon. Asher is only 16 days old
I am hoping to go wheeling the end of the month. Can't go Saturday b./c I have to sell the MT/Rs.
I will be back out soon. Asher is only 16 days old
#13
Contributing Member
Thread Starter
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
I really like these tires. THey are great on the road.
It is supposed to rain later, so the test continues.
Good looking too. Not that it's much of an issue, but we'll see how they are offroad.
Hopefully I will teat them this weekend....
It is supposed to rain later, so the test continues.
Good looking too. Not that it's much of an issue, but we'll see how they are offroad.
Hopefully I will teat them this weekend....
#15
Contributing Member
Join Date: Apr 2003
Location: Albuquerque, NM
Posts: 2,549
Likes: 0
Received 0 Likes
on
0 Posts
For the sake of a proper archive...to my knowledge SteveO had these on a 3rd gen first, back in October of 2003. Props to SteveO for being 2 1/2 years ahead of the rest of us.
https://www.yotatech.com/forums/show...&highlight=295
The pics are gone now, but you can see the date it was posted.
I bought his used in June of 2005.
https://www.yotatech.com/forums/show...&highlight=295
The pics are gone now, but you can see the date it was posted.
I bought his used in June of 2005.
#19
Contributing Member
Join Date: Apr 2005
Location: Miami FL
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
i have been looking for a set of them...i found a site that has them for $97 a tire for 265/70/17...and discounttire has them for $120..but discount has free shipping...do you guys think they would do a price match?
#20
from this thread:
https://www.yotatech.com/forums/f123/tire-recomendations-77877/
and...
https://www.yotatech.com/forums/f123/tire-recomendations-77877/
holy crap that's CHEAP!!!
http://www.barretire.com/Tires/NITTO.htm
NITTO TERRA GRAPPLER LT265/75/R16 D - (1) $101.93 EA - (4) for $407.72
FREE SHIPPING VIA UPS
http://www.barretire.com/Tires/NITTO.htm
NITTO TERRA GRAPPLER LT265/75/R16 D - (1) $101.93 EA - (4) for $407.72
FREE SHIPPING VIA UPS
the best thing is to price match it at www.discounttire.com they also have free shipping. they said they usually dont b/c barretire isnt a huge retailer, but it didnt take much to talk them into it.
Thread
Thread Starter
Forum
Replies
Last Post
LittleUgly
86-95 Trucks & 4Runners (Build-Up Section)
15
01-02-2020 01:30 PM
charlie_fong
General Vehicle Related Topics (Non Year Related)
0
09-27-2015 10:06 PM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM