Pressure line ... I think I blew it.
05-24-2005 | 08:04 AM
#1
Thread Starter
Contributing Member
Joined: Apr 2004
Posts: 7,122
Likes: 6
From: 5th Gen San Diegan, California
Pressure line ... I think I blew it.
Well, I blew it in the fact that I cut it to extend it, and the fact that it blew up when I tried to turn the steering wheel.
Its the pressure line that goes into the steering gear for the rack and pinion.
When installing my trailmaster lift, I couldnt get it to reach, so they tell you to cut the RETURN line and add a hose. I did the same thing to the pressure line and thats NOT good.
So, I was thinking about taking off the frame mount and bending it. But, I donno.
What the hell can I do here?
Its the pressure line that goes into the steering gear for the rack and pinion.
When installing my trailmaster lift, I couldnt get it to reach, so they tell you to cut the RETURN line and add a hose. I did the same thing to the pressure line and thats NOT good.
So, I was thinking about taking off the frame mount and bending it. But, I donno.
What the hell can I do here?
05-24-2005 | 10:03 AM
#2
Thread Starter
Contributing Member
Joined: Apr 2004
Posts: 7,122
Likes: 6
From: 5th Gen San Diegan, California
Whats the friggin DEAL!?
Every thread I start gets moved? I needed a quick answer so I went to gen tech cause there are like 40 people viewing....This forum has like what....1 person viewing....myself?
Grrrrrrrrrrrrrr
Every thread I start gets moved? I needed a quick answer so I went to gen tech cause there are like 40 people viewing....This forum has like what....1 person viewing....myself?
Grrrrrrrrrrrrrr
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 02:51 PM
skoti89
Offroad Tech
3
07-08-2015 01:05 AM
