Maintenance & Repair Archives Note: This section will be merged in with the other tech areas soon, and is now closed

3rd Gen Oil change 3.4L how many quarts?

 
Thread Tools
 
Search this Thread
 
Old 01-01-2004 | 03:26 PM
  #1  
E1's Avatar
E1
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 134
Likes: 0
From: Maryland
Question 3rd Gen Oil change 3.4L how many quarts?

Just changed the oil on my 98 4runner Limited 3.4L (first since bought), and I thought 6 quarts would qwench her thirst but it only got to the bottom of the low oil mark on the dipstick. I put in another half quart and now I am in between the dots but is this normal one book I have said 5.7 quarts? This was done wth a filter change but what gives? No leaks just more oil than I expected 6.5 quarts?

Last edited by E1; 01-01-2004 at 03:27 PM.
Old 01-01-2004 | 04:31 PM
  #2  
4RUNR's Avatar
Guest
 
Joined: Jun 2003
Posts: 1,615
Likes: 0
From: North Pole
I just changed mine and it did take 6.5. 6 quarts of dino came out after 5000 miles, 6.5 went in. Shows about 85% full on the dip stick.
Old 01-01-2004 | 07:30 PM
  #3  
E1's Avatar
E1
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 134
Likes: 0
From: Maryland
Cool I need to get Toyota's service manual 2 and stop trusting the of the shelf books 5.7 quarts ha wont blow my engine up. Glad I had the extra quart though.
Old 01-01-2004 | 08:11 PM
  #4  
Bob_98SR5's Avatar
Registered User
 
Joined: May 2002
Posts: 10,036
Likes: 5
From: Los Angeles
E1,

http://www.4runners.org/articles/oil

Bob
Old 01-01-2004 | 09:48 PM
  #5  
AFRunner's Avatar
Registered User
 
Joined: Sep 2003
Posts: 445
Likes: 0
From: Germany
That might not have taken into acount the amount the oil filter holds.
Aaron
Old 01-02-2004 | 09:10 AM
  #6  
E1's Avatar
E1
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 134
Likes: 0
From: Maryland
Thanks Bob I looked at that as well before I posted, but it just seemed like it was alot of oil for a 3 litre? Anyway I always check my oil level after a change anyway, and good thing too. The Hayes book I looked in did say with new filter 5.7quarts I believe I will go double check.
Old 01-03-2004 | 08:20 PM
  #7  
CLin9383's Avatar
Registered User
 
Joined: Jun 2002
Posts: 1,409
Likes: 0
From: TX
just changed it today and 5.5 is what i put in..
Old 01-04-2004 | 07:30 PM
  #8  
E1's Avatar
E1
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 134
Likes: 0
From: Maryland
It must take more than a minute to drain back down? Checked today and it's .5 over. So it looks like 5.5 - 6 is my magic number?
:pat: oops. I don;t think a half quart over will hurt but I will drain some off anyway.
Old 01-13-2004 | 12:29 PM
  #9  
4RunnerFever's Avatar
Contributing Member
 
Joined: Mar 2003
Posts: 883
Likes: 0
From: Santa Cruz, CA
5.5 for me last sunday.
Old 04-04-2004 | 01:23 PM
  #10  
ewarnerusa's Avatar
Contributing Member
 
Joined: Jun 2003
Posts: 511
Likes: 0
From: Helena, Montana
I just changed mine today, Amsoil synthetic oil with oversized Amsoil oil filter (SDF34) and it took 6 quarts to fill it to the top bead on the dipstick. At only 5 quarts it was halfway inbetween the low and high bead after letting the engine run for a minute. added another half quart and it increased slightly after letting it run again. Added the rest of the sixth quart and it was to the top bead after running again.
Old 04-05-2004 | 04:56 AM
  #11  
SLC Punk's Avatar
Contributing Member
 
Joined: Jul 2002
Posts: 5,862
Likes: 0
From: SLC, UT
6 quarts for me last Wednesday.
Old 04-09-2004 | 10:31 AM
  #12  
Yotabozo's Avatar
Registered User
 
Joined: Jun 2003
Posts: 56
Likes: 0
guys, i'd like to try changing the oil in my 01 this weekend....never done it before...is it hard? which oil/parts do I need? I tried to search for a DIY but couldn't find one.....is there a link to one somewhere?

thanks
Old 04-09-2004 | 11:28 AM
  #13  
humanoid's Avatar
Contributing Member
 
Joined: Dec 2003
Posts: 1,171
Likes: 0
From: Sunny SoCal
Originally Posted by Yotabozo
guys, i'd like to try changing the oil in my 01 this weekend....never done it before...is it hard? which oil/parts do I need? I tried to search for a DIY but couldn't find one.....is there a link to one somewhere?

thanks
Should try doing a search under the tech articles/maintenance... anyhoo, here's a link

http://www.4runners.org/articles/oil/

Last edited by humanoid; 04-09-2004 at 11:30 AM.
Old 04-09-2004 | 11:34 AM
  #14  
Bob_98SR5's Avatar
Registered User
 
Joined: May 2002
Posts: 10,036
Likes: 5
From: Los Angeles
yotabozo,

pssst...read this thread. there's a great how-to in here

bob
Old 04-09-2004 | 12:07 PM
  #15  
Yotabozo's Avatar
Registered User
 
Joined: Jun 2003
Posts: 56
Likes: 0
umm..i feel totally stupid now...i must have overlooked bob's link....sorry just in a rush to get outta here for the weekend.....enjoy your Easters !
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smthwsn357
86-95 Trucks & 4Runners
15
05-01-2024 07:28 AM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
Huntingtruckcletus
Other Makes Cars/Trucks
0
07-08-2015 05:26 PM
HRDC0R19
86-95 Trucks & 4Runners
3
07-05-2015 06:43 PM



Quick Reply: 3rd Gen Oil change 3.4L how many quarts?



All times are GMT -8. The time now is 09:24 AM.