ricerocket

I bought an 88 toy 4x4 with 22re engine sitting in the back.I built engine set it in hooked up wiring harness but now have two plugs coming out of harness close to the center of intake one is a blue plug with one yellow wire in it. The other is a black two wire plug any ideas were they go?

Lumpy

Show us your pic's

Philbert

iTrader: (2)

If you don't know how to post photos here (or on any forum really):

Get a photobucket (free) account and upload your pics. Once uploaded, each pic will have a "direct link" - a long web address (just mouse over any of the pics in my DIY posts and you'll see what I mean).

then, when you post, clock on the icon in between the "earth one" and the "voice bubble" one (hint: in the "quick reply" section at the bottom of each page, these are the three icons on the top right of the text box). Once clicked, it will prompt you for a URL - copy/paste your photobucket url for a pic in there, and hit enter - ta da! Do this for each pic you upload - you can do many in one post.

Welcome!
__________________

ricerocket

I will post pics tonight i'm @ work. Does anyone know were to find a labled pic or diagram of the wiring harness?

Lumpy

Click the FSM in my sig that will give you a ton of info.

As far as the wires...My 92 has 2 plugs that go no where. I believe 1 is for the A/C idle up and the other maybe for cruse or part of the A/C as well. I do not have 22re with A/C to rightly know.