T100 Manual Hub conversion
03-10-2010 | 06:02 PM
#1
Thread Starter
Registered User
Joined: Mar 2010
Posts: 4
Likes: 0
T100 Manual Hub conversion
Does anyone have a write up on doing the ADD to manual locking hubs? I don’t think it will be that difficult but I only want to do it once, fallowing someone who’s already done it!
Thanks for all the useful Info guy’s!
Thanks for all the useful Info guy’s!
03-11-2010 | 05:17 AM
#3
Registered User
Joined: Jun 2009
Posts: 47
Likes: 0
From: MD/VA
https://www.yotatech.com/~corey/tech.../matt_hubs.htm
The Mile MArker and Warn hubs suck compared to Aisins
The Mile MArker and Warn hubs suck compared to Aisins
03-13-2010 | 09:30 AM
#4
Registered User
Joined: Jun 2009
Posts: 19
Likes: 0
From: Mulvane, KS
I also used these instructions:
https://www.yotatech.com/~corey/tech/matt_hubs/matt_hubs.htm
I installed the Warn Premium Hubs, but I drive a "pavement-princess" and only rarely go off-road...no problems with them at all. The hardest part of the install was tapping the first cone washer out of each side, but the entire job only took about 30-minutes.
https://www.yotatech.com/~corey/tech/matt_hubs/matt_hubs.htm
I installed the Warn Premium Hubs, but I drive a "pavement-princess" and only rarely go off-road...no problems with them at all. The hardest part of the install was tapping the first cone washer out of each side, but the entire job only took about 30-minutes.
03-13-2010 | 12:59 PM
#5
Thread Starter
Registered User
Joined: Mar 2010
Posts: 4
Likes: 0
https://www.yotatech.com/~corey/tech.../matt_hubs.htm
The Mile MArker and Warn hubs suck compared to Aisins
The Mile MArker and Warn hubs suck compared to Aisins
Just what I was looking for!
Thanks finder216 & Zuke
Last edited by Kbach; 03-13-2010 at 01:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 02:44 PM
