surface rust on frame
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: Florida
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
surface rust on frame
just wondering whats the best way to get some surface rust off the frame, its been building up for a few months now. also, what paint should i use to prevent it?
#2
Contributing Member
Join Date: May 2006
Location: South Carolina
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
This is pretty highly debated througout the forum.
What I do is sand/scrape it down and then coat in Rustoleum primer followed by a couple of coats of topcoat. This has worked well for me.
My general opinon of POR-15 (based only on reading these forums) is that it is expensive and my not last any longer than the method I use. That said, however, I still want to order their combo pack and try it out for myself.
I think the biggest key is to keep at it. After hunting season finally ends (currently in hog trapping followed by turkey season) I plan on washing everything down and repainting all the small rust places that have developed.
What I do is sand/scrape it down and then coat in Rustoleum primer followed by a couple of coats of topcoat. This has worked well for me.
My general opinon of POR-15 (based only on reading these forums) is that it is expensive and my not last any longer than the method I use. That said, however, I still want to order their combo pack and try it out for myself.
I think the biggest key is to keep at it. After hunting season finally ends (currently in hog trapping followed by turkey season) I plan on washing everything down and repainting all the small rust places that have developed.
Thread
Thread Starter
Forum
Replies
Last Post
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
themightykhoner
86-95 Trucks & 4Runners
2
08-11-2015 07:37 PM
matrad
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
08-08-2015 03:00 PM