CitrusTheDragon

Best mod I have done yet is removed it from the I.D.-10T it was with

CitrusTheDragon

Call me crazy but what did u take out and replace??? It looks cool but for us the don't know the parts on the table explain please

MaK92-4RnR

its an ISR mod, Citrus. ( Intake silencer removal ) basically adds the "air induction" noise when you push the gas.

CitrusTheDragon

Audible HP. Like my Scion xB resonator as a muffler

Teuf

No tj88, there was a pump spout sticking out of the water, I edited out. I guess it made the water look strange Aye.

85gijunk4x4

lol the guy i got my truck from ripped his out, he said it was annoying, i figured it couldnt be too bad so i switched my pass. side with the drivers side, i must have had it plugged for 10 seconds 'fore i unplugged it and said the heck with that...even if the dome light doesnt come on when i open the door...

PismoJoe

Hmm what do you do for a living citrus

CitrusTheDragon

study for my t-ten tech and BAR ref license. Currently I am a brake, lamp, and (assisting) smog tech

PismoJoe

I find that hard to believe. you sound like a lube tech but then again I guess I'm a little buthurt from your rude PM. Nice start at YT

kiyobrown

Hehehe.

CitrusTheDragon

Way to hijack, if you have a bone to pick with me personally take it to PM or start you're own Fight Club page

Who would like to get this back on track?

PismoJoe

Like I said, VERY nice start on YT. I don't think I need to say more

Xeo

uh anyways the intake tube is from a Mazda percedia its a wee bit smaller than the original 3vze intake tube but its better than having all that troublesome junk in the already tight engine bay. Plus it feels more torquey!? >_<

Ron Helmuth

rear spoiler to match body color. Distinctive look and functional as my SR5 never had one to begin with.

gametom

cheapo ebay headlights, welded up a front push bar less than 60 total

B4Runner

its a factory light. normal 2 prong plug with about 10' of wire to a light that is like 10 times brighter than the dome. hang it on the roll bar, under the hood, looking under the dash. its super useful. one of the rarer sr5 mods ive been told.

1981 yota

thanks man. my door panel never fell off i had to take it off because wen i hit bumps the window will bounce out of the track and fall to the bottom of the door and i needed an arm rest so i put the handle back on lol

85gijunk4x4

lol thats funny, and a good fix...my door panel was ripped off by the p/o because he dented the door in want wanted to push it back...when i cleaned out the bed i found the panel all shreaded up soaking wet under like 40,000lbs of dirt, so i put the handle back on the door so i can dhut it without ripping my hand open on some sharp a$$ rusty metal lol

tj884Rdlx

ah yes, i see how you 'deleted' the spout. i don't know what program or tool you used to cover it up, but i swear i can see a ghost-like duplication of Sam's right eye where the spout was.

Sam's looking pretty cute sitting in that pond. hah! dogs are so damn funny!

Tj

tj884Rdlx

thx, Brandon. that is pretty cool. i've never heard of such a thing. i've been considering putting an additional cig. liter right about there for a hand-held flood, or maybe even cutting in one of those cop car spotlights. ANYONE HAVE ONE OF THESE ALREADY?
but it sure would be cool to have the OEM accessory. i'll have to keep an eye out for it when i'm junk yard scrounging.


ANYWAY, i guess my best cheap mod is my matching remote control holder and pencil-can cup-holder. i just took them from my desk at work because someone gave me a nicer one. (interesting story: i rec'd some lady's mail by mistake, it had a check in it. i looked her address up on the web, and actually found a phone number. i called her, and she came to get it. a week later i received a thank you note with a hand made little cup!)



here's something else weird. if i took this picture of my cup holder, who the heck is sitting in my seat??? i have no idea who that is right now! ugh. memory is slippin'!!