Newbie Question about IFS diff
#1
Registered User
Thread Starter
Newbie Question about IFS diff
This may seem like a weird question, but here it goes. What exactly holds the axle shaft in place for the 86-95 IFS? Is it just the c-clip that snaps into the 3rd member or is there more to it? I picked up an ADD IFS from a '92 and I need to swap the axle tube from my existing diff to this diff and I was wondering if there was something else I needed to remove? The Haynes manual is pretty worthless in this area and if anyone has a link to a diagram or a FSM for the 1st and 2nd gen 4runners would be much appreciated!
Thanks in advance.
Thanks in advance.
#3
Registered User
Thread Starter
Millball,
Thanks!
I wanted to say I found a link to an FSM for a 93 that helps shed some light on the diff. So my apologies in advance.
Thanks!
I wanted to say I found a link to an FSM for a 93 that helps shed some light on the diff. So my apologies in advance.
Last edited by 68jimmy; 01-31-2016 at 06:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: PARTING OUT TWO 1ST GEN 4RUNNERS IFS Lancaster CA
4x4-runner
Vehicles - Parting Out
67
08-17-2020 01:52 PM
chuckd83
95.5-2004 Tacomas & 96-2002 4Runners
0
11-30-2015 01:40 PM