Shrockworks 4th gen front bumper installed
#22
Registered User
Joined: May 2003
Posts: 112
Likes: 0
From: West Virginia
Mikestang
Truck looks great, I was looking at your sig and did not see a lift mentioned. I was wondering if the weight of the bumper is having any affect on the ride or if you have noticed any sagging of the springs. That is of course if you are still on the stock suspension.
Thanks
Shawn
Truck looks great, I was looking at your sig and did not see a lift mentioned. I was wondering if the weight of the bumper is having any affect on the ride or if you have noticed any sagging of the springs. That is of course if you are still on the stock suspension.
Thanks
Shawn
#23
Sliders and lift are next. I should have done them first, but I couldn't pass on the bumper. I'll be trying to get the sliders grey to match, and plan on doing Hoe's front and rear by the end of the year.
Yes, the suspension is stock. I measured height before and after the install and lost 1/4" on each side in the front. Total weight gain is about 100 pounds (without a winch) and I can feel it in the front over big dips and speed bumps. I haven't gone off-road yet with it.
Yes, the suspension is stock. I measured height before and after the install and lost 1/4" on each side in the front. Total weight gain is about 100 pounds (without a winch) and I can feel it in the front over big dips and speed bumps. I haven't gone off-road yet with it.
#28
Gotta say You've got the nicest rig I've ever seen- wish it was black or white though. You've worked hard in assembling all that gear to create something truly amazing functionally and it's also looking very badass! Keep up the good work!
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM