Will a 4 runner seats fit a toyota pickup 4wd ?
#1
Registered User
Thread Starter
Join Date: Sep 2009
Location: Fontana ca
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Will a 4 runner seats fit a toyota pickup 4wd ?
will the seats off a 4runner fit a toyota 4wd truck? also will the power window motor and regulator fit my pickup? does anyone know?
#4
Registered User
iTrader: (1)
The 89-95 4Runner front seats will fit in the 89-90 pickup. Three out of four holes will line up.
You will need to cut the third bracket. Turn the O into a sideways U. You will need to switch the seatbelt bolt with the seat bracket bolt (I think).
It's suuuuper easy and soooo worth it.
You will need to cut the third bracket. Turn the O into a sideways U. You will need to switch the seatbelt bolt with the seat bracket bolt (I think).
It's suuuuper easy and soooo worth it.
#6
Registered User
Join Date: Sep 2009
Location: boone nc
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
they may work,Honda seats work great also, i've got bucket seat's out of a 97 honda prelude and they bolted right up in my single cab i had to tap the front left braket with a hammer and three out of four holes lined up just fine.
Trending Topics
#11
Registered User
Join Date: Sep 2009
Location: boone nc
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
the Honda seat had the buckle attached to the side,i just replaced it with the Toyota one i'll post pics it's pretty easy to do
I personally recommend it it's a BIG upgrade,i would love to get seats out of a Honda s2000
I personally recommend it it's a BIG upgrade,i would love to get seats out of a Honda s2000
Last edited by weeman93; 01-31-2010 at 06:38 PM.
#14
Registered User
Join Date: Jan 2004
Location: Due West, SC
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Its on the to do list. if I can only find some blue ones in good condition, looking for the console as well as it basically mounts right up. There are a few threads on here about seat swaps that are helpful. also found a thread over on toyotaminis where they use mid 80's celica seats, looked nice. I just want whatever I get to be a close to stock or stock match. Found some decent pathfinder seats but wasnt sure how much mods it would take.
#15
Registered User
Join Date: Sep 2009
Location: boone nc
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
my buddy wrecked his colorado,and he's gettin a new cab for his truck with leather seats,i think i might see if the cloths seats will fit in mine,if so i may sell mine
#16
Registered User
Join Date: Sep 2009
Location: boone nc
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
well here is my seats and how i installed them if you have any questions or want any more pics just ask and i'll be more than happy to post them,sorry my truck usually is not this dirty but it's winter and it's hard to keep clean
here they are already in
the seat rails
and on the back i put in a spacer to lift up the back of the seat to be level
and here is where the honda seat buckle bolted up,i just replaced it with mine
and where the stock Toyota seat belt was bolted to the floor the back right braket lined up perfect also i used longer boltsfor the back bolts
''if your sitting in the seat this is the back right bolt''
and this is my temporary center console thinkin about getting one out of a 4runner
here they are already in
the seat rails
and on the back i put in a spacer to lift up the back of the seat to be level
and here is where the honda seat buckle bolted up,i just replaced it with mine
and where the stock Toyota seat belt was bolted to the floor the back right braket lined up perfect also i used longer boltsfor the back bolts
''if your sitting in the seat this is the back right bolt''
and this is my temporary center console thinkin about getting one out of a 4runner
Last edited by weeman93; 02-01-2010 at 03:35 PM.