what do you think of my new 4-runner?
#61
Registered User
Thread Starter
Join Date: May 2006
Location: MA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
the white was beat and after all the body work it wasnt really an option. but yes this is my DD
#62
Just found your thread. You have done an awesome job in a very short time. I like it
So you were able to use the dual transfer case crossmember with only one case for now? If so that is good to know as I picked up a Budbuilt mount off ebay for dirt cheap...shipping was more...
Also where did you find your boomer rang shackles? I need those for my Trekker...
Thanks,
Robb
So you were able to use the dual transfer case crossmember with only one case for now? If so that is good to know as I picked up a Budbuilt mount off ebay for dirt cheap...shipping was more...
Also where did you find your boomer rang shackles? I need those for my Trekker...
Thanks,
Robb
Last edited by dropzone; 08-09-2007 at 07:37 AM.
#63
Registered User
Thread Starter
Join Date: May 2006
Location: MA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
the duel case crossmember works with one case but the drain plug rubs the crossmember and you need to drop the case in order to change the fluid. i got the boomerand shackles from sky manufacturing
#67
Registered User
Join Date: Dec 2006
Location: kentucky
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Awesome build-up! I'm curious about the half doors though. You mentioned it is your DD so what do you do if it rains, and what is the main purpose of them other than looks?
#68
Registered User
Thread Starter
Join Date: May 2006
Location: MA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
yes they are a cheep set of 35in ATs i use for the street but i blew a 37 so i just ran them so i could wheel
#69
Registered User
beautiful
i always wished i had a 1st gen just so i could have half doors haha,
i like the flat green btw
im jealous, Nice Work!
hopefully when im out of this apt and in a house i will have enough garage space to get to work!
i always wished i had a 1st gen just so i could have half doors haha,
i like the flat green btw
im jealous, Nice Work!
hopefully when im out of this apt and in a house i will have enough garage space to get to work!
#79
Registered User
Thread Starter
Join Date: May 2006
Location: MA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
ya the birf joint itself is fine but the rest of it is done
#80
Registered User
Thread Starter
Join Date: May 2006
Location: MA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
still got a couple more welds to do but it is pretty much done
i made it out of the pair of shackles i bought at AA parts that were in the front of my truck before i got my boomerangs, a stock mount, and a set of sky SAS frame tubes that they sent me by mistake so all in all it cost me like 20$ i have enough materials to make a second one too.
im going to order new motor mounts in a couple weeks to so hopefully ill get rid of all my driveline vibs
i made it out of the pair of shackles i bought at AA parts that were in the front of my truck before i got my boomerangs, a stock mount, and a set of sky SAS frame tubes that they sent me by mistake so all in all it cost me like 20$ i have enough materials to make a second one too.
im going to order new motor mounts in a couple weeks to so hopefully ill get rid of all my driveline vibs