Time to rebuild
#28
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2010
Location: Glen Burnie MD
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Lots of pics
Detonation killed the piston.
hope you can see the cracks in the flywheel.
connection seperated where it shouldnt have
silver rivets and scorch marks. Pilot bearing fell out when i removed the plate and BB's rolled down my driveway...
Pic of the head that i got from B4Wheeler that i sent out to be rebuilt before the motor went completely up. Had hopes of having an engine rdy to go, but we can see, that didnt happen
#31
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2010
Location: Glen Burnie MD
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
I'll have more pics on later. So far the Heads, Block, Plenium and Fuelrails are at the shop getting a good cleaning.Went shopping at B4Wheeler's house yesterday ( Thanks a ton!!! ) for a few parts that didnt make it..lol In the process of cleaning up whats left, I'll show you why later, and have a couple goodies that i might be putting in... in a few weeks when it all goes back together. @ Lumpy yeah it is a huge mess right now.. but not for long... and doesnt everyones pully look that way? lol still looking for that idle up for my PS pump tho (hint,hint) thinki i got almost everything else i needed yesterday
#33
Registered User
the problem is you took this picture over two years ago, and you are just getting to it?....haha j/k
what are you pointing out?....the tensioner bearings are visable = no worky
Sorry, i am looking at this on my phone.
what are you pointing out?....the tensioner bearings are visable = no worky
Sorry, i am looking at this on my phone.
#35
Registered User
Thread Starter
iTrader: (1)
Join Date: Feb 2010
Location: Glen Burnie MD
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
just DL a couple more pics.
# 5 bearing
Bi-Metal sensor ????
crank timiing gear has seen better days....
nothing left of her.
A Yota 'sploded on my table
Oh, and found a mouse nest..... must have been in there from when the P/O let it sit on the side of a street for a year.
#40
Registered User
The other sensor looks like the TVV. Was it on the back of the intake manifold?
They break all th time. One hose goes to the charcoal canister IIRC.
Your girl must really love you if she let's you explode an engine like that in the house.
They break all th time. One hose goes to the charcoal canister IIRC.
Your girl must really love you if she let's you explode an engine like that in the house.