straight wiring the fuel pump just for testing 22re
#1
Registered User
Thread Starter
straight wiring the fuel pump just for testing 22re
Just want to see if any one sees any thing wrong with disconnecting the electrical connector going to the pump and running a jumper straight to battery?
I have the fuel line disconnected from the filter and going into a bottle so no fuel will spill. Reason asked is I am getting voltage while cranking to the pump harness but the pump is not pressurizing the line.
I have the fuel line disconnected from the filter and going into a bottle so no fuel will spill. Reason asked is I am getting voltage while cranking to the pump harness but the pump is not pressurizing the line.
Thread
Thread Starter
Forum
Replies
Last Post
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM