Setting up T-bars for install-does this look right
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: Boston, MA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Setting up T-bars for install-does this look right
I've got everything redone now and ready to go back in. When pulling the bars out the other day, I was very careful to note left and right bars (surprised their isn't a L and R stamped into each end), but after moving them twice for cleaning, etc., I'm only 99% positive the bars are correctly oriented. Also, with bead blasting and painting the A-arm connectors, I really have no idea which one is which or if it even matters.
I set them up here getting ready for reinstall. Here's what they look like.
Driver has the blue bit of paint at the tail end, passenger has the pink. White match marks indicating big spline are "underneath". the adjusters are tilted up 45 degrees or so.
All in all, it looks right. Hoping someone here can confirm.
Also, any tips or tricks for installing these pain free? Lot's of pain getting them out. Thanks!
I set them up here getting ready for reinstall. Here's what they look like.
Driver has the blue bit of paint at the tail end, passenger has the pink. White match marks indicating big spline are "underneath". the adjusters are tilted up 45 degrees or so.
All in all, it looks right. Hoping someone here can confirm.
Also, any tips or tricks for installing these pain free? Lot's of pain getting them out. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: 33x12.5x15 bfg ko a\t
muddpigg
Axles - Suspensions - Tires - Wheels
8
11-02-2015 05:36 AM