Post Your Pics!!!
06-05-2014, 08:17 AM
Hello guys..... My recent built and my very 1st posting here..... There is still few self recovery stuffs lacking before I get to abuse this ride..... Lovely forum!
Attachment 98489
Attachment 98489
06-05-2014, 03:32 PM
BorneoRunner
Pretty bumper! Yes, please post how you did the lights.
Gevo,
Notice the left-hand drive, the architecture and the vegetation in background? Chances are bumper was locally-fabbed where BorneoRunner lives.
Mark,
She's looking good, and looks like she's about to take-off
Brandonlow27
Awesome team photo. Congrats!
Pretty bumper! Yes, please post how you did the lights.
Gevo,
Notice the left-hand drive, the architecture and the vegetation in background? Chances are bumper was locally-fabbed where BorneoRunner lives.
Mark,
She's looking good, and looks like she's about to take-off
Brandonlow27
Awesome team photo. Congrats!
06-05-2014, 06:08 PM
Registered User
06-05-2014, 06:37 PM
Registered User
Join Date: Jun 2014
Location: Kota Kinabalu, Sabah, North Borneo
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Guys....
As for the Bumper.....
1) This is how it looks initially... Its a local made here (North Borneo) specially for Pajero...
2) Another angle for the Bumper.... and me... haha...
3) Since surf is going to be in the workshop for long time for full suspension system conversion, decided to mod the bumper while tools is around and surf is sitting idle. That guys is not me... He's the welding chef...
As for the Headlight...
1) Started from an aftermarket clear glass headlight...
2) Plastidip painted the reflectors and mount the projector...
3) As you can see, the projector is plug and play. The mounting kits and nut comes together with the projector..
4) Re-heat the existing adhesive and simply put back the glass and its clip, done... Bulb for this projector is H1 mount...
5) Low Light at about 30ft away... The purple/bluish lines on cut off is not photographic CA error... it is how it is... There is a glare of a rainbow on the road surface about 10ft from the car... kind a cool effect from retrofitsource lens... Btw, I have adjusted the alignment side to side to light it wide...
6) Highlight at about 30ft away...
Forgive me I don't have step by step photograph for headlight retrofitting and I hope ya all get the general idea of how is...
Links:
PROJECTOR AND SHROUD
Owh my.... Cool rig and lovely gatherings! Congratulation btw!
It is heavy... That's the main reason pipe bars has to go... Got it locally sir... My location...
As for the Bumper.....
1) This is how it looks initially... Its a local made here (North Borneo) specially for Pajero...
2) Another angle for the Bumper.... and me... haha...
3) Since surf is going to be in the workshop for long time for full suspension system conversion, decided to mod the bumper while tools is around and surf is sitting idle. That guys is not me... He's the welding chef...
As for the Headlight...
1) Started from an aftermarket clear glass headlight...
2) Plastidip painted the reflectors and mount the projector...
3) As you can see, the projector is plug and play. The mounting kits and nut comes together with the projector..
4) Re-heat the existing adhesive and simply put back the glass and its clip, done... Bulb for this projector is H1 mount...
5) Low Light at about 30ft away... The purple/bluish lines on cut off is not photographic CA error... it is how it is... There is a glare of a rainbow on the road surface about 10ft from the car... kind a cool effect from retrofitsource lens... Btw, I have adjusted the alignment side to side to light it wide...
6) Highlight at about 30ft away...
Forgive me I don't have step by step photograph for headlight retrofitting and I hope ya all get the general idea of how is...
Links:
PROJECTOR AND SHROUD
Owh my.... Cool rig and lovely gatherings! Congratulation btw!
It is heavy... That's the main reason pipe bars has to go... Got it locally sir... My location...
Last edited by Borneo4runner; 06-05-2014 at 06:44 PM.
06-05-2014, 08:04 PM
06-05-2014, 08:11 PM
Registered User
Join Date: Jun 2014
Location: Kota Kinabalu, Sabah, North Borneo
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
06-05-2014, 11:49 PM
Thanks Guys....
As for the Headlight...
Started from an aftermarket clear glass headlight...
Plastidip painted the reflectors and mount the projector...
As you can see, the projector is plug and play. The mounting kits and nut comes together with the projector..
Re-heat the existing adhesive and simply put back the glass and its clip, done... Bulb for this projector is H1 mount...
Forgive me I don't have step by step photograph for headlight retrofitting and I hope ya all get the general idea of how is...
Links:
PROJECTOR AND SHROUD
As for the Headlight...
Started from an aftermarket clear glass headlight...
Plastidip painted the reflectors and mount the projector...
As you can see, the projector is plug and play. The mounting kits and nut comes together with the projector..
Re-heat the existing adhesive and simply put back the glass and its clip, done... Bulb for this projector is H1 mount...
Forgive me I don't have step by step photograph for headlight retrofitting and I hope ya all get the general idea of how is...
Links:
PROJECTOR AND SHROUD
love your bull bar, before, and after,
i need to keep fixing mine, after an idiot decided to hit the brakes on a bend (you should see his car, back axle fordwards 2f.)
it looks bad, but still drives,its just metal to be fix.
06-06-2014, 12:18 AM
Registered User
Join Date: Jun 2014
Location: Kota Kinabalu, Sabah, North Borneo
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
sorry to be a pain asking questions about the same thing, but where can i get them for the right hand drive aftermarket clear glass headlight, due i don't seem to find them, thanks.
love your bull bar, before, and after,
i need to keep fixing mine, after an idiot decided to hit the brakes on a bend (you should see his car, back axle fordwards 2f.)
it looks bad, but still drives,its just metal to be fix.
love your bull bar, before, and after,
i need to keep fixing mine, after an idiot decided to hit the brakes on a bend (you should see his car, back axle fordwards 2f.)
it looks bad, but still drives,its just metal to be fix.
Bought mine locally here in Kota Kinabalu... RHD... Cost me about RM350/AUD116 a pair... There is a few "look like" a reputable seller on ebay if u search for KZN130 Clear Headlight...
06-08-2014, 06:51 PM
Registered User
Join Date: Jan 2014
Location: Maryland
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
My 1990 Standard cab
New 31x10.50 15 BFG all terrains on steel rock crawler D-window rims. This was me breaking them in! This was like in Feb lol.
Last edited by JShara; 06-08-2014 at 06:58 PM.
06-08-2014, 07:53 PM
Registered User
Join Date: Jun 2014
Location: Kota Kinabalu, Sabah, North Borneo
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
