Post Your Pics!!!
Registered User
Join Date: Jan 2013
Location: Arizona Territory
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
iTrader: (2)
Registered User
Registered User
Here ya go Chef!
Driveway posin'... Keep in mind, I just picked it up and have been sicker than hell so haven't gotten a chance to clean it, but it's still not bad for 20 year old rig.
I need to order a front bumper asap, that little bit of surface rust on the bumper is the only rust on the whole thing and it bugs the hell out of me.
Driveway posin'... Keep in mind, I just picked it up and have been sicker than hell so haven't gotten a chance to clean it, but it's still not bad for 20 year old rig.
I need to order a front bumper asap, that little bit of surface rust on the bumper is the only rust on the whole thing and it bugs the hell out of me.
Registered User
No problem Chef. Thanks again, it's got a few imperfections inside (cracked dash, small tear on the bottom of the back seat and some random stains) but overall it's not too bad.
I'm Corey btw, even though I do like being called Mr. Fish
I'm Corey btw, even though I do like being called Mr. Fish
Registered User
Join Date: Aug 2010
Location: Oregon, USA
Posts: 2,027
Likes: 0
Received 0 Likes
on
0 Posts
Ya, we have a bunch of O'Reillys...I'll have to stop by and see if they have it. Doesn't show up on their website either.
Registered User
iTrader: (1)
Join Date: Mar 2010
Location: Tucson, AZ
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Did a little wheeling out at Chiva Falls with a bunch of J**ps this last weekend but it was all fun nontheless! even got some more carnage! We had 48 hours of rain before this trip so the river was flowing nicely! got in up to about 1/3 of my door. also finally tried an obstacle i always avoided and made it fine!
this guy got himself in a bad spot on "The Flipper" yes its named that for a reason.
I dont like chrome anyways...
hopefully this isnt bent too bad that an alignment wont make up for.
this guy got himself in a bad spot on "The Flipper" yes its named that for a reason.
I dont like chrome anyways...
hopefully this isnt bent too bad that an alignment wont make up for.
Registered User
Az eagle scout. Awesome pix. Sucks to see the part in the font bend dude.
Btw gwt some rock sliders asap! You're lucky that's all that happened. Lol I hoghly recommend it. I've used mine a ton of times and I can personally say I've saved myself from some major body damage with some of those major hits I've taken to them haha
Btw gwt some rock sliders asap! You're lucky that's all that happened. Lol I hoghly recommend it. I've used mine a ton of times and I can personally say I've saved myself from some major body damage with some of those major hits I've taken to them haha
Registered User
Join Date: Aug 2006
Location: ruffin, NC
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
ONE Ton Runner
Just picked this up couple weeks ago, had plans to take it out today but weather was bad!!
1991 Toyota 4runner
3.0 V6 automatic
Dodge Dana 60 Front axle with 5.13 gears and a 35 spline Detroit. Stock shafts
High angle driveline Dana 60 to Toyota pinion flange.
Ford Dana 60 rear axle loaded with 5.13 gears and 30 spline spool with stock shafts rear disk conversion brackets included not installed
Trail Gear rear Leaf spring swap with 5.5 inch springs
All pro offroad SAS 5 inch springs and shock hoops (need installed)
Sky manufacturing pitman arm
Sky manufacturing brake booster adapter with GM 3/4 ton master.
Stock Tank and pump installed to a switch.
255 LPG external fuel pump included
Five 37x12.5x 16.5 Humvee tires
Five 16.5x8.25 procomp rock crawler wheels
Ballistic Fabrication High steer arms
Ballistic Fab dana 60 diff covers
Ballistic Fab high steer crossover kit. With one ton Chevy tie rod ends
Steering box has been relocated to clear the steering.
Custom Square Tube drive shafts front and rear Cv in the rear. (Front shaft sits at 27 degrees but does not bind yokes have been clearanced and has 106 degrees of movement before bind 53 degrees every direction.
Pics from the for sale ad, i have done some buffing on the red and it looks nice, sliders being built now and will probably order a front bumper soon. Only 140k, interior is nice too!
https://www.dropbox.com/s/fjzvf7qrjxk9zc5/IMAG0079.jpg
1991 Toyota 4runner
3.0 V6 automatic
Dodge Dana 60 Front axle with 5.13 gears and a 35 spline Detroit. Stock shafts
High angle driveline Dana 60 to Toyota pinion flange.
Ford Dana 60 rear axle loaded with 5.13 gears and 30 spline spool with stock shafts rear disk conversion brackets included not installed
Trail Gear rear Leaf spring swap with 5.5 inch springs
All pro offroad SAS 5 inch springs and shock hoops (need installed)
Sky manufacturing pitman arm
Sky manufacturing brake booster adapter with GM 3/4 ton master.
Stock Tank and pump installed to a switch.
255 LPG external fuel pump included
Five 37x12.5x 16.5 Humvee tires
Five 16.5x8.25 procomp rock crawler wheels
Ballistic Fabrication High steer arms
Ballistic Fab dana 60 diff covers
Ballistic Fab high steer crossover kit. With one ton Chevy tie rod ends
Steering box has been relocated to clear the steering.
Custom Square Tube drive shafts front and rear Cv in the rear. (Front shaft sits at 27 degrees but does not bind yokes have been clearanced and has 106 degrees of movement before bind 53 degrees every direction.
Pics from the for sale ad, i have done some buffing on the red and it looks nice, sliders being built now and will probably order a front bumper soon. Only 140k, interior is nice too!
https://www.dropbox.com/s/fjzvf7qrjxk9zc5/IMAG0079.jpg
Last edited by ads86runner; 11-27-2013 at 04:47 PM.
Registered User
Ads4Runner. That axle is hella wide. I like it!
All u need is a awesone looking front bumper and you're set!
Btw how does the 3vze do with all the weight of the axles and the big ol' tires? Just wondering cuz I'm also rockin' that motor
All u need is a awesone looking front bumper and you're set!
Btw how does the 3vze do with all the weight of the axles and the big ol' tires? Just wondering cuz I'm also rockin' that motor
Registered User
Join Date: Aug 2006
Location: ruffin, NC
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Thanks RED!! Yea I agree about the bumper, been looking around just not sure if i want to have my buddy build or just buy one. I haven't had it on the road a whole lot, trying to work out some kinks from the PO but I have had it up to around 50 with no problems. Those 5.13's def help the 3.0 and it seemed like it had plenty of go left in it.
Registered User
iTrader: (1)
Join Date: Mar 2010
Location: Tucson, AZ
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Az eagle scout. Awesome pix. Sucks to see the part in the font bend dude.
Btw gwt some rock sliders asap! You're lucky that's all that happened. Lol I hoghly recommend it. I've used mine a ton of times and I can personally say I've saved myself from some major body damage with some of those major hits I've taken to them haha
Btw gwt some rock sliders asap! You're lucky that's all that happened. Lol I hoghly recommend it. I've used mine a ton of times and I can personally say I've saved myself from some major body damage with some of those major hits I've taken to them haha
I have a substantial list of things that need to get done over winter break, sliders, bumpers, paint, and its time for a lot of preventative maintenance too. all in between snowboarding trips haha
Registered User
Registered User
That's cool post a pic
the j hook we got a pair off Ebay for $40, but the hitch itself is custom. my boyfriend is a metal fabricator for a company called Sculpture Works. its 4 different pieces and I swear it looks like one solid piece (even before paint)
Also he named my hook Grimm lol
the j hook we got a pair off Ebay for $40, but the hitch itself is custom. my boyfriend is a metal fabricator for a company called Sculpture Works. its 4 different pieces and I swear it looks like one solid piece (even before paint)
Also he named my hook Grimm lol