Post Your Pics!!!
Registered User
Blindfoldmemphis those tires dont rub? I know I had to trim a tiny piece of the inner wheelwell plastic to stop my 31's from rubbing. I can only imagine what 35's would sound like lol
BTW Kickass tires, I used to have those same ones on my previous rig. Only in 31's don't you just love how they humm while you drive. My friends always knew when I was coming down their block with the sound of those thornbird tires, loud music, and FlowMaster exhaust. Lol
BTW Kickass tires, I used to have those same ones on my previous rig. Only in 31's don't you just love how they humm while you drive. My friends always knew when I was coming down their block with the sound of those thornbird tires, loud music, and FlowMaster exhaust. Lol
Registered User
Join Date: Jul 2011
Location: Reno Nv
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
They do rub a bit. I just got them last night, summer is almost over, better enjoy them now, I got them for 300, figured the rims worth twice that so... why not?
Registered User
Just the a tiny tiny piece of the plastic front wheel wells. literally only 2cm by 1inch. Toward the back innner part of them. I had to cut because there was rubbing going on so every time i would make a tight turn it would sound like a Bike with a card in its spokes only louder. Cutting the small piece fixed that problem.
Registered User
Here are my new wheels I just picked up last night.
Probably shouldn't have mounted them but it's summer, top is coming off again, and I am going to enjoy them.
Went from 31' x 10.5 to 35x12.50 r16
No lift, a lot of rear end sag and stock gears on a 3.0 5 speed.
Going to stay off the freeway and just cruise.
and they look like tractor tires, I hope they are legal, going for a small lift later, the turning hits a bit... but I am here to enjoy summer in my runner
Probably shouldn't have mounted them but it's summer, top is coming off again, and I am going to enjoy them.
Went from 31' x 10.5 to 35x12.50 r16
No lift, a lot of rear end sag and stock gears on a 3.0 5 speed.
Going to stay off the freeway and just cruise.
and they look like tractor tires, I hope they are legal, going for a small lift later, the turning hits a bit... but I am here to enjoy summer in my runner
it helps keeps sticky hands from finding out where you live. im sure there are other ways of find out but this is just one less way for them to
Registered User
Registered User
Are you sure those are 35s? They barely look any taller than the 31s. I think if you went from 31s to 35s with that little distance between the rear wheel well and the top of the tire, the 35s would be constantly rubbing.
For $300, you got ripped off. I say de-mount the tires from the rims and sell the rims themselves. You'll get more money that way. No one will want the Thornturds, so you might as well take them to an angry neighbors front porch, defecate on them, light them on fire, ring the door bell, and run away. That's about all they're good for...maybe not even that.
Registered User
This 4runner has no lift but has 38" and alot of clearence..
Last edited by hjalti_gto; 08-21-2012 at 10:07 PM.
Registered User
iTrader: (4)
Gots me some new tirres
Got new tires and fit them on my almost stock runner
zuk with XJ coils gave around 2 inches and I cranked the T bars for only about an inch of lift in the front, should sit level with top on.
35x15.5 Swamper SXs and no rubbing when I turn for some reason? lock to lock and it only rubs at full lock.
Going to trim fenders tomorrow
zuk with XJ coils gave around 2 inches and I cranked the T bars for only about an inch of lift in the front, should sit level with top on.
35x15.5 Swamper SXs and no rubbing when I turn for some reason? lock to lock and it only rubs at full lock.
Going to trim fenders tomorrow
Registered User
Join Date: Jul 2011
Location: Reno Nv
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Got new tires and fit them on my almost stock runner
zuk with XJ coils gave around 2 inches and I cranked the T bars for only about an inch of lift in the front, should sit level with top on.
35x15.5 Swamper SXs and no rubbing when I turn for some reason? lock to lock and it only rubs at full lock.
Going to trim fenders tomorrow
zuk with XJ coils gave around 2 inches and I cranked the T bars for only about an inch of lift in the front, should sit level with top on.
35x15.5 Swamper SXs and no rubbing when I turn for some reason? lock to lock and it only rubs at full lock.
Going to trim fenders tomorrow
I think that is the perfect height that I am looking for. What gears are you running?
Yeah my bed is almost done not a whole lot left to do. A little here and a little there. I wish I would have taken more pics before I put the bed on. It started as just a plain wooden bed but it slowly grew. Here's a pic before the bed. I had done a few things but not very good.
And a pic of the basic FB
And a pic of the basic FB