Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Post Your Pics!!!

Thread Tools
 
Search this Thread
 
Old 07-02-2012, 05:11 PM
  #10901  
Registered User
 
93Xtra-Cab's Avatar
 
Join Date: Apr 2011
Location: Monkton, MD
Posts: 1,947
Likes: 0
Received 1 Like on 1 Post
All clean

Old 07-02-2012, 05:18 PM
  #10902  
Registered User
 
Discombobulated's Avatar
 
Join Date: Oct 2011
Location: Denver CO
Posts: 2,361
Received 247 Likes on 185 Posts
Finally got my receiver painted and put on now I have a recovery point in the back YAY!!! But now that I said that I will never use it and it's just added weight and lost clearance, but hey it's there if I need it but lemme tell ya grade 8 nuts and bolts is no fricken joke costed me almost thirty bucks for the frickin hardware, but I got the receiver for dirt cheap so whatever.
Old 07-02-2012, 05:35 PM
  #10903  
Registered User
 
MistaHulk's Avatar
 
Join Date: Jul 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Name:  b.jpg
Views: 100
Size:  83.2 KB

Name:  a.jpg
Views: 121
Size:  82.2 KB

Last edited by MistaHulk; 07-03-2012 at 07:08 PM.
Old 07-02-2012, 05:36 PM
  #10904  
Registered User
 
chronoboy's Avatar
 
Join Date: Jun 2012
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Oh man, I think they look better on the nova then my 4runner. I have a set of weld rims on it now kinda the same look, but I think I'll be putting the ultra's back on, they just look "sharper". Plus like stated above not to many people are running around with these.... (Although I just seen a nova with a set on it)
Old 07-03-2012, 10:06 AM
  #10905  
Registered User
 
REDYOTA's Avatar
 
Join Date: Jul 2003
Location: georgia
Posts: 244
Likes: 0
Received 1 Like on 1 Post
Originally Posted by 93Xtra-Cab
All clean

Take care of her keep her that clean God knows I wish mine still was. Got mine when I was 16, 28 now I guess I didnt do a terrible job. If I bobbed my bed and got a new door maybe some half doors my body would be straight.
Old 07-03-2012, 10:30 AM
  #10906  
Registered User
 
wii_tarded's Avatar
 
Join Date: May 2008
Location: Knoxville, TN
Posts: 1,063
Received 2 Likes on 2 Posts
Originally Posted by MistaHulk
Best place for it, getting the tires dirty. Only wish I had the time to do that more. Where you located and where was the pic taken?
Old 07-03-2012, 10:45 AM
  #10907  
Registered User
 
Redeth005's Avatar
 
Join Date: Apr 2012
Location: Los Angeles CA
Posts: 2,817
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by 93Xtra-Cab
All clean

does the inside look as soon as the outside
Old 07-03-2012, 11:07 AM
  #10908  
Registered User
iTrader: (5)
 
ChefYota4x4's Avatar
 
Join Date: Jun 2009
Location: Lake Havasu, AZ
Posts: 19,281
Received 18 Likes on 13 Posts
Originally Posted by Redeth005
does the inside look as soon as the outside
Yes .......hahaha. JK, I'm not sure, but I THINK I've seen pics of his CLEAN interior on his thread/and on here a few pages back? Can't remember. But hey, I'd drive it home with NOTHING in there but a lawn chair, as long as it looked like that outside/no rust/great running heart in her.... SOLD! haha.
Old 07-03-2012, 11:16 AM
  #10909  
Registered User
 
Redeth005's Avatar
 
Join Date: Apr 2012
Location: Los Angeles CA
Posts: 2,817
Likes: 0
Received 2 Likes on 2 Posts
Lol yea that exterior is half the battle. It's hard to find a truck that is well maintained both inside and outside and motor. Then again, with these trucks, moat are always on bad shape cuz of rust, offroad dents, poorly kept up in or out. That's why I had asked cuz that truck looks clean. I'd expect it to look like your truck under the hood chef.
Old 07-03-2012, 01:01 PM
  #10910  
Registered User
 
85gijunk4x4's Avatar
 
Join Date: May 2010
Location: piney hicks nj
Posts: 3,120
Received 1 Like on 1 Post
Originally Posted by StewsRunner
Oh snap, SAS and 3.4?! That's a nice bank account you have there
**WAS a nice bank acount
Old 07-03-2012, 01:27 PM
  #10911  
Registered User
iTrader: (5)
 
ChefYota4x4's Avatar
 
Join Date: Jun 2009
Location: Lake Havasu, AZ
Posts: 19,281
Received 18 Likes on 13 Posts
Originally Posted by Redeth005
Lol yea that exterior is half the battle. It's hard to find a truck that is well maintained both inside and outside and motor. Then again, with these trucks, moat are always on bad shape cuz of rust, offroad dents, poorly kept up in or out. That's why I had asked cuz that truck looks clean. I'd expect it to look like your truck under the hood chef.
Thanks, man! Yeah, .... I've seen some, oddly, that look as clean as that red one.... but the frame is TOAST! SAD what the East Coast and Great White North do to these rigs... But I GREATLY admire how many of them bring them back and wheel the crud outta them! haha..

One thing I can tell ya... more than how clean my engine bay is(bit coated in Havasu Fine Powder Dust... but otherwise clean).... I have MORE joy than anything, looking UNDER the rig and seeing............. NOT A DRIP! hahaha. That is some NERVE racking stuff... wondering if it'll be worse soon, etc. Plus, the poor driveways, ya know? haha.
Old 07-03-2012, 01:31 PM
  #10912  
Registered User
 
93Xtra-Cab's Avatar
 
Join Date: Apr 2011
Location: Monkton, MD
Posts: 1,947
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Redeth005
does the inside look as soon as the outside
Of course! Check out my build or the Interior Pic thread and you'll see!

Originally Posted by REDYOTA
Take care of her keep her that clean God knows I wish mine still was. Got mine when I was 16, 28 now I guess I didnt do a terrible job. If I bobbed my bed and got a new door maybe some half doors my body would be straight.
On the right side, the bed is a tad "ripply", it's got a rust hole on the bottom of the left front fender, some various dents in the right fender and the rear of the bed on the left side. Overall, it's not bad.
Old 07-03-2012, 01:37 PM
  #10913  
Registered User
iTrader: (5)
 
ChefYota4x4's Avatar
 
Join Date: Jun 2009
Location: Lake Havasu, AZ
Posts: 19,281
Received 18 Likes on 13 Posts
Originally Posted by 93Xtra-Cab
On the right side, the bed is a tad "ripply", it's got a rust hole on the bottom of the left front fender, some various dents in the right fender and the rear of the bed on the left side. Overall, it's not bad.
NOPE, that's unacceptable, Shawn! Just stop, right now,....park it,..... walk away with the keys on the front driver side wheel-top..... And I'll be by to collect it within 12 hours!!! YOU CAN NOT be seen in a rig with so much damage.... Just not gonna have it! ..............I'm here to help!!!!!!

hehehe.
Old 07-03-2012, 07:33 PM
  #10914  
Registered User
 
MistaHulk's Avatar
 
Join Date: Jul 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Picture was taken during a visit to the offroad park in Bridgeport, TX.


Originally Posted by wii_tarded
Best place for it, getting the tires dirty. Only wish I had the time to do that more. Where you located and where was the pic taken?
Old 07-04-2012, 02:16 AM
  #10915  
Registered User
 
pitmaster's Avatar
 
Join Date: Apr 2012
Location: Central Kentucky
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
I thought this was a thread containing pics... Not bs'ing with neighbor joe... Not to get anyone worked up, just sayin
Old 07-04-2012, 08:26 AM
  #10916  
Registered User
 
Badger62811's Avatar
 
Join Date: Jan 2011
Location: Clarksville, TN / Ft. Campbell
Posts: 1,369
Likes: 0
Received 1 Like on 1 Post
And on that note...

Picked up another fence today for a buddy, decided "what the heck, snap a pic"

Old 07-04-2012, 10:38 PM
  #10917  
Registered User
 
PowerstrokeJoe's Avatar
 
Join Date: Apr 2011
Location: Sedalia, MO
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Diablo22RE
I like those rims, what are they? Thanks!
They are Mickey Thompson Classic II's 16X8.

G- Thanks the paint job is about shot and for some reason the camera made it much better than it is.
Old 07-06-2012, 08:03 AM
  #10918  
Registered User
 
WhiteYotas's Avatar
 
Join Date: Jun 2012
Location: Fresno, CA
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ChefYota4x4

With the 31's on her..........


^^^^
Hey Chef, are those 31x9.50 or 10.50?
Old 07-06-2012, 08:06 AM
  #10919  
Registered User
 
WhiteYotas's Avatar
 
Join Date: Jun 2012
Location: Fresno, CA
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
*edit
Old 07-06-2012, 12:51 PM
  #10920  
Registered User
iTrader: (5)
 
ChefYota4x4's Avatar
 
Join Date: Jun 2009
Location: Lake Havasu, AZ
Posts: 19,281
Received 18 Likes on 13 Posts
Hey WhiteYotas....

They are 31x10.50x15's on Stock Toyota Aluminum SR5 Wheels(Which are 15x7"). The OTHER rubber I posted are 32x11.50x15" "MUD KING"/Made by BFG, on Outlaw-2/15x8" Alum. Rims with 3.75" Backspacing(I think, on the backspacing... Didn't buy them new...I'd have to look).


Quick Reply: Post Your Pics!!!



All times are GMT -8. The time now is 08:54 PM.