Post Your Pics!!!
Maybe, I am not sure. I know my doors come off lol. Oh well doesn't matter, just reach around and lean seat forward, grab handle and open and get out.
If top is off, jump out the side or back lol.
If top is off, jump out the side or back lol.
Registered User
Join Date: Jun 2008
Location: North Carolina
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Or you could get a door from a 4 Runner and paint it to match yours.
I had the passenger panel apart a couple of weeks ago replacing the window motor. If I remember correctly, each handle has a rod that goes back to the door latch, so you will most likely be replacing the door latch as it will have "two" places for rods to clip into it. You will need a handle and door panel from a 4Runner (or cut a hole in your own panel). And you will need to fabricate the plate that holds the handle in position in the door.
Or you could get a door from a 4 Runner and paint it to match yours.
Or you could get a door from a 4 Runner and paint it to match yours.
MattRX 88 SR5 3.0
Hey Fellas, just picked this up last weekend. It's my third 4runner. I had a 2002 Sport that I sold five years ago, and my wife currently drives a 2006 sport v6. I've been searching for an unmolested 1st Gen ever since I sold my 98 Frrontier. Bought this one for even money. Actually found in the classified section, another member linked the original Craigslist ad. Thanks Yotatech!
Registered User
iTrader: (1)
What mine looked like fresh outta the box:
On a more recent note, before:
During:
After:
Registered User
Join Date: Jan 2011
Location: Clarksville, TN / Ft. Campbell
Posts: 1,369
Likes: 0
Received 1 Like
on
1 Post
As much as I love the look of those tube bumpers on the back, I don't think I could ever part with my stocker. I got rear ended at a red light by a Mercedes doing 30. All I got was a little dent and a bent I bolt for trailer safety chains. The Mercedes was totaled. The front bumpers on these trucks are pretty weak, but the rears are strong as hell. Just my $.02.
Registered User
iTrader: (1)
^ This bumper is way beefier then the stock one. On top of that, the stocker is rotting from the inside out.
I do agree with you on the surface area reference, though.
I plan on welding some tube from the sides towards the middle like the tacoma bumpers here:
I do agree with you on the surface area reference, though.
I plan on welding some tube from the sides towards the middle like the tacoma bumpers here:
Last edited by streetlancer; 03-31-2012 at 06:40 PM.