Post Your Pics!!!
#8861
Wow Chef! Great looking 4runner. Almost like looking in the mirror.
TJ88, My tire/wheel setup is 15x8 eagle alloys with bfg mud km 32/11.5. Thank you too, I am definitely picking up a few of those matchbox cars for my boys (and myself)
TJ88, My tire/wheel setup is 15x8 eagle alloys with bfg mud km 32/11.5. Thank you too, I am definitely picking up a few of those matchbox cars for my boys (and myself)
Last edited by Traction; 10-09-2011 at 09:46 PM.
#8864
Registered User
i wonder how many other things you guys have similar? open the closet, same clothes; open the fridge, same food....
very good lookin' Runners, guys. keep 'em shiny side up!
#8865
Registered User
iTrader: (5)
Hahahaha.. you're funny, tj.......
Well, .....
4Crawler 1.5" BJ Spacers
Zuk- 12"x125# Coils in the rear over Leaf Pack
4Cralwer Diff Drop
Deleted Sway Bar
All new Ball Joints(Including Downey Mega Travel Uppers- Old/New Stock) OEM Lowers
New Control Arm Bushings
OME 2" lift front shocks and Stabilizer
All new Brakes/Rotors/Drums/Calipers/Wheel Cyl's, 6500 Ago
Fully Rebuilt(largely by myself, yea! lol) 22RE with Sansai Bearings/Hastings-USA rings/Eskendarian Racing Springs/Engnbldr Valves/Mang. Bronze Guides/Viton Seals/Steel Guide Chain kit w/new Cover-Oil Pump-Water Pump/261 engnbldr Crawler CAM/.20 Over/Topline Pistons/Replacement Block was stock 150K w/orig crank/Crank done 10/10 and slapped in!(2nd Motor in 1.5 years for those who don't know, due to a DUM-DUM MACHINIST I initially used!) All new OEM Vacuum and MOST of the Sensors new as well, along with a New OEM fuel pump.
LCE Header w/2.25 to Highflow CAT, 2.25 to Borla exhaust and 2.25" out Borla Tip
Replaced Steering Gear and Pump 4K ago
2 Sets of Shoes..... Nearly new BFG-AT/KO 31x10.50x15's on Orig. Alum. SR5 Rims..... 32x11.50x15' Mud Kings on Outlaw 2- 15x8's with little backspacing for the 'stick out a lil' look, lol.
Con-Ferr 40x60" Roof Rack (in SLOW repaint/powdercoating process, lol)
Downey Grill/Brush/Light Gaurd with 2 Dick Cepek 8" Halogens wired right(Thanks, Ian, Gonovr, others!
)
4.30 Thirds with Spartan Locker in Rear
Working on tC seat Swap and, well, .... THE W56 IS ON THE WAY OUT......... slowly! hahahaha.
Doesn't leak a DROP, after 3500 miles, running great, no smoke, no oil consumption, no 'TICK-TICK-TICK'ing..... Climbs the Cahon Pass at 65-70mph with the air on in 5TH, woot! LOL.
Dang, I lost track, ... I'm sure there's more, just have to get back to work! lol.
MOST IMPORTANTLY, ..>>>>>>>>> I GIVE YOTATECH AND MY HOMIES MUCH of the credit for the fact that it's not on fire in some ditch with an ax in the windshield and a note, next to her under a rock, reading, "She pushed me TOOOOOO far!" hahahahah!
Seriously.. LOVE these toys and LOVE this site!
PS> 15-16mpg City, 21 HWY.... WTH? Yeah, ... that'll be another 'GREMLIN HUNT' for another thread, no doubt! lol.
Well, .....
4Crawler 1.5" BJ Spacers
Zuk- 12"x125# Coils in the rear over Leaf Pack
4Cralwer Diff Drop
Deleted Sway Bar
All new Ball Joints(Including Downey Mega Travel Uppers- Old/New Stock) OEM Lowers
New Control Arm Bushings
OME 2" lift front shocks and Stabilizer
All new Brakes/Rotors/Drums/Calipers/Wheel Cyl's, 6500 Ago
Fully Rebuilt(largely by myself, yea! lol) 22RE with Sansai Bearings/Hastings-USA rings/Eskendarian Racing Springs/Engnbldr Valves/Mang. Bronze Guides/Viton Seals/Steel Guide Chain kit w/new Cover-Oil Pump-Water Pump/261 engnbldr Crawler CAM/.20 Over/Topline Pistons/Replacement Block was stock 150K w/orig crank/Crank done 10/10 and slapped in!(2nd Motor in 1.5 years for those who don't know, due to a DUM-DUM MACHINIST I initially used!) All new OEM Vacuum and MOST of the Sensors new as well, along with a New OEM fuel pump.
LCE Header w/2.25 to Highflow CAT, 2.25 to Borla exhaust and 2.25" out Borla Tip
Replaced Steering Gear and Pump 4K ago
2 Sets of Shoes..... Nearly new BFG-AT/KO 31x10.50x15's on Orig. Alum. SR5 Rims..... 32x11.50x15' Mud Kings on Outlaw 2- 15x8's with little backspacing for the 'stick out a lil' look, lol.
Con-Ferr 40x60" Roof Rack (in SLOW repaint/powdercoating process, lol)
Downey Grill/Brush/Light Gaurd with 2 Dick Cepek 8" Halogens wired right(Thanks, Ian, Gonovr, others!
![Great](https://www.yotatech.com/forums/images/smilies/great.gif)
4.30 Thirds with Spartan Locker in Rear
Working on tC seat Swap and, well, .... THE W56 IS ON THE WAY OUT......... slowly! hahahaha.
Doesn't leak a DROP, after 3500 miles, running great, no smoke, no oil consumption, no 'TICK-TICK-TICK'ing..... Climbs the Cahon Pass at 65-70mph with the air on in 5TH, woot! LOL.
Dang, I lost track, ... I'm sure there's more, just have to get back to work! lol.
MOST IMPORTANTLY, ..>>>>>>>>> I GIVE YOTATECH AND MY HOMIES MUCH of the credit for the fact that it's not on fire in some ditch with an ax in the windshield and a note, next to her under a rock, reading, "She pushed me TOOOOOO far!" hahahahah!
Seriously.. LOVE these toys and LOVE this site!
![Great](https://www.yotatech.com/forums/images/smilies/great.gif)
PS> 15-16mpg City, 21 HWY.... WTH? Yeah, ... that'll be another 'GREMLIN HUNT' for another thread, no doubt! lol.
#8866
Pretty eerie how similar they are...mine has been completely gone through in the last 6,000 miles.
Rebuilt engine, new head, rebuilt tranny, transfercase, new ujoints, balanced driveshaft, new radiator, ac compressor, all hoses, new balljoints, etc., new Yukon 4.88 gears front and rear. Detroit locker rear and a lockrite in the front. LCE header also. 1.5 balljoint spacer too.
Now for the real kicker, I just noticed where Chef is from....I went through Palos Verdes Yesterday. I was hunting in D14 (san bernadino forest area).
I live near Yosemite National Park.
Rebuilt engine, new head, rebuilt tranny, transfercase, new ujoints, balanced driveshaft, new radiator, ac compressor, all hoses, new balljoints, etc., new Yukon 4.88 gears front and rear. Detroit locker rear and a lockrite in the front. LCE header also. 1.5 balljoint spacer too.
Now for the real kicker, I just noticed where Chef is from....I went through Palos Verdes Yesterday. I was hunting in D14 (san bernadino forest area).
I live near Yosemite National Park.
Last edited by Traction; 10-10-2011 at 02:08 PM.
#8867
Registered User
Join Date: Jan 2011
Location: Clarksville, TN / Ft. Campbell
Posts: 1,369
Likes: 0
Received 1 Like
on
1 Post
Nice Runners you two. I like Traction's wheels. They're shinier ![Wink](https://www.yotatech.com/forums/images/smilies/wink.gif)
On a side note, I'm heading to SC tomorrow for a few months. After that I'll be in VA for about a year. If I still have a truck when I get back (someone is borrowing it till I can drive it again) I got some big plans. Roll-on bed liner, custom headache rack w/ LED lights, custom bumpers front/rear, lift, winch, and finish it up with a paint job. My weathered fenders and black hood are really getting to me. Sticking with the same color, minus the P stripes.
Who knows, I might be posting a "Is it worth fixing or should I scrap it?" thread... lol.. KIDDING (I hope)
Y'all don't miss me while I'm gone.
![Wink](https://www.yotatech.com/forums/images/smilies/wink.gif)
On a side note, I'm heading to SC tomorrow for a few months. After that I'll be in VA for about a year. If I still have a truck when I get back (someone is borrowing it till I can drive it again) I got some big plans. Roll-on bed liner, custom headache rack w/ LED lights, custom bumpers front/rear, lift, winch, and finish it up with a paint job. My weathered fenders and black hood are really getting to me. Sticking with the same color, minus the P stripes.
Who knows, I might be posting a "Is it worth fixing or should I scrap it?" thread... lol.. KIDDING (I hope)
Y'all don't miss me while I'm gone.
#8868
Registered User
Join Date: Oct 2011
Location: WestVirginia
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
New to the site. been lurking for a while though. figure its time to add my .02
Here is my 95 4Runner 3.0hh V6. Bought it stock and sagging w/ 140k for $1500. added flowmaster exhaust, procomp springs and bj spacers to fit the Km2's. Hella 500's, removed sway bars frnt and rear, Rear chop almost finished. Looking for a few last parts to start my SAS. using a dana 44 67" wms/wms w/ 37x13.00x16. and a matching rear. just need a good deal on gear sets. Then its getting Dual case and twin stick.
Before the Chop-
![Name: IMG_2864.jpg
Views: 125
Size: 56.4 KB](https://www.yotatech.com/forums/attachments/f116/179662d1501885158-post-your-pics-img_2864.jpg)
![Name: IMG_2867.jpg
Views: 113
Size: 66.7 KB](https://www.yotatech.com/forums/attachments/f116/179663d1501885158-post-your-pics-img_2867.jpg)
After the Chop-
![Name: IMG_0656.jpg
Views: 122
Size: 158.8 KB](https://www.yotatech.com/forums/attachments/f116/179664d1501885158-post-your-pics-img_0656.jpg)
Here is my 95 4Runner 3.0hh V6. Bought it stock and sagging w/ 140k for $1500. added flowmaster exhaust, procomp springs and bj spacers to fit the Km2's. Hella 500's, removed sway bars frnt and rear, Rear chop almost finished. Looking for a few last parts to start my SAS. using a dana 44 67" wms/wms w/ 37x13.00x16. and a matching rear. just need a good deal on gear sets. Then its getting Dual case and twin stick.
Before the Chop-
![Name: IMG_2864.jpg
Views: 125
Size: 56.4 KB](https://www.yotatech.com/forums/attachments/f116/179662d1501885158-post-your-pics-img_2864.jpg)
![Name: IMG_2867.jpg
Views: 113
Size: 66.7 KB](https://www.yotatech.com/forums/attachments/f116/179663d1501885158-post-your-pics-img_2867.jpg)
After the Chop-
![Name: IMG_0656.jpg
Views: 122
Size: 158.8 KB](https://www.yotatech.com/forums/attachments/f116/179664d1501885158-post-your-pics-img_0656.jpg)
![Name: IMG_0659.jpg
Views: 157
Size: 151.9 KB](https://www.yotatech.com/forums/attachments/f116/179665d1501885158-post-your-pics-img_0659.jpg)
#8873
Registered User
Join Date: Mar 2007
Location: Colorado
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
I am going to Haiti on Sunday to do some volunteer work for the second time.
We get around mostly in these Toyota trucks that are straight up bulletproof.
I came across this photo of a work crew driving upstream.
We get around mostly in these Toyota trucks that are straight up bulletproof.
I came across this photo of a work crew driving upstream.
![Name: 5916007834_3768d1a5a9_b.jpg
Views: 114
Size: 241.6 KB](https://www.yotatech.com/forums/attachments/f116/174383d1501885158-post-your-pics-5916007834_3768d1a5a9_b.jpg)
#8875
Registered User
Join Date: Mar 2007
Location: Santa Clara California
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
Went for a drive today!
Also found some nice trails but it was to dark for pics, they came out too blurry to even see
Also found some nice trails but it was to dark for pics, they came out too blurry to even see
![](http://img5.imageshack.us/img5/1661/20111010183646181.jpg)
Last edited by 91muddog; 10-10-2011 at 10:54 PM.
#8880
Registered User