Post Your Pics!!!
#6083
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
They are KMC XD122 wheels. They come flat black or polished. These flat black ones are hard to come by every time I call my local 4WParts. I cannot find them on their website any more, but a call to the store and he can get them for me by April. I paid $800 for the wheel/tire combo, great discount from them, since it would have cost me closer to $1200. You can find them online at a few places, but MSRP is $120 and I couldn't find them any cheaper than about $135-$150 without shipping.
I think these would look pretty good too but with a set of General's w/red lettering.
http://www.4wheelparts.com/Wheels/Me...MR30157060506N
I think these would look pretty good too but with a set of General's w/red lettering.
http://www.4wheelparts.com/Wheels/Me...MR30157060506N
#6084
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
As far as the light output vs. the stock sealed lamps...phenominal! These have the best and most even light spread, with that distinctive euro cut-off, see pic.
I think on safety's side they are definitely worth the price. With the higher wattage bulbs or the stock wattage ones shown in the pics there is very minimal glare for opposing traffic. When I flip the high's on in the canyons or desert all I have to say is !! HUGE difference than the stock lights, and I thought the low beam light output and pattern were pretty good.
My buddy has a 99 taco and he likes them better that his IPF's. I constantly get flipped off for flashing my brights at some jackwagon who cuts me off on the road just because the light is so concentrated and bright with the stock 55/60 bulbs. I think the bulbe I'm running are Philips X-Treme Power H4's, found here: http://www.powerbulbs.com/product_detail.asp?prod=43 The light color is a true white with about 7% or less blue tint in them...I hate anything other than a white light, pet peve I think.
#6086
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
BTW the relay kit comes with all wiring, relay's, ceramic H4 plugs, and all the misc bits and pieces. No running to the store because "I forgot something" or "this won't work".
#6087
Registered User
Join Date: Oct 2008
Location: Burlington, VT
Posts: 1,584
Likes: 0
Received 0 Likes
on
0 Posts
so very clutch when its getting dark and the hardware stores gonna close in 10 minutes and you live eight away
#6088
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Chef,
yea, everything red on the truck is painted...rattle can style! couple coats of primer, few more of red, and the sliders have clear on them, the cage in the back does not because it's going to eventually be covered up when that project comes to an end.
yea, everything red on the truck is painted...rattle can style! couple coats of primer, few more of red, and the sliders have clear on them, the cage in the back does not because it's going to eventually be covered up when that project comes to an end.
#6089
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Flash,
exactly, cause you know in that rush to go get that part, you're gonna usually forget something else and gonna have to wait till morning anyways.
exactly, cause you know in that rush to go get that part, you're gonna usually forget something else and gonna have to wait till morning anyways.
#6093
4crawler has a similar kit, but with the wiring / connectors already preassembled and a resistor for the high beam indicator.
#6095
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Corax,
Not sure, not hooked up yet. Too many other projects. Will look into it. Thx for the info & link!
Mudd Duck, listed in the classifieds for $120 + shipping. I get an awesome shipping discout so I'd pass that on to u or whoever buys it. But $130 for local pick-up.
Not sure, not hooked up yet. Too many other projects. Will look into it. Thx for the info & link!
Mudd Duck, listed in the classifieds for $120 + shipping. I get an awesome shipping discout so I'd pass that on to u or whoever buys it. But $130 for local pick-up.
#6099
Registered User
I would love to zebra stripe my runner! Haha!
My trucks about to wake up from hibernation.
Photo504.jpg?t=1296443010
Motor mostly ready to go back in!
Photo505.jpg?t=1296443010
My trucks about to wake up from hibernation.
Photo504.jpg?t=1296443010
Motor mostly ready to go back in!
Photo505.jpg?t=1296443010
#6100
Registered User
Join Date: Jun 2010
Location: Morganton, NC
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
T.O'
Yeah i like a ones from marlin crawler too. But i think i can make one (there fairly simple really) for a couple hundred dollars cheaper, and sacrifice a little perfectioness ha
Yeah i like a ones from marlin crawler too. But i think i can make one (there fairly simple really) for a couple hundred dollars cheaper, and sacrifice a little perfectioness ha
Last edited by Wheelindealin; 01-30-2011 at 06:57 PM.