Post Your Pics!!!
#4042
Registered User
#4043
Registered User
ya that truck look like it would rub the heck when it even tought about hitting a buump. shoot i fit a set of 37x14.50 super swampers m-16 on mine but it rubbed when i left the driveway. but good luck fitting 33x15.50's with just body lift. lol bet the tires would look nice stuffed way up in there
#4044
as soon as i can find some 33.15.5 i'll be the test dummy to try them. my 33.12.5's dont rub at all even when fully turned and i wheel the hell outta my truck. yesterday i couldn't get up over a rock in a trail that i did with my 31's so i got out and locked the hubs still couldn't do it. well i went back up the road to my buddies dads house and i felt like a da. the whole time i was locked and all i had to do was shift into 4wd. (when i got out and locked i unlocked)
Last edited by yotarover; 07-30-2010 at 08:21 AM.
#4045
Registered User
ya but a 33x15.50 is way wider than a 12.50. i use to run my 33x13.50 swampers on a 12 wide rim and could get them to ruba lil. when i switched over to a 10 wide rim they dont rub at all and look no where near as wide. lol
#4046
#4053
Registered User
iTrader: (5)
Hey Mike, ... DANG, let me tell ya, ...that rear end was a bit more mangled than I'd thought. It curled everything toward the passenger side, crushed in the passenger side bracket to underbody mounting flange, REALLY tweeked the built on corner-body piece that drops straight down, two holes, for the longer piece to bolt into? Took me quite a while to get it that straight, hahaha. But yes, while it's negligible, I'd like it to be as straight as possible. It's easy to get it back off, but the drop down mounting piece is welded in, so I'd have to pop it out and weld a new one in(believe it or not, Toyota still does have those available, lol). For now, it's ok... it's not being 'forced' to be in place or anything to the point that it will manipulate the plastic like last time.
Heck, at least it looks better than it did, and I got it lined up with the tail gate, lol.
Heck, at least it looks better than it did, and I got it lined up with the tail gate, lol.
#4060
Registered User
Join Date: Sep 2008
Location: middle of no where Alaska
Posts: 4,355
Likes: 0
Received 2 Likes
on
2 Posts
You mean it being dented and chipped? I can thank a tree off-roading and lots of rocks on the road for that. lol. The "skirt" is just the factory plastic valence chopped because I hated how it made the front look HUGE. Thank