Post Your Pics!!!
#3584
Registered User
iTrader: (1)
ive read this whole post and have been waiting to get my springs before i put pics up.
here's mine a lil bit after i got it
![](http://i65.photobucket.com/albums/h221/c10guy/Cleanyota03.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/Cleanyota02.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/Cleanyota01.jpg)
just had to make it look better.
![](http://i65.photobucket.com/albums/h221/c10guy/aftermudding.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/Aftermudding02.jpg)
mudd is the best and cheapest paint job=)
after the mud got a chance to soak in, as u can see my springs r crap the actually had an under arc.
![](http://i65.photobucket.com/albums/h221/c10guy/Mud051.jpg)
some flex before i installed the coils
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02082.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02083.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02084.jpg)
so i bought a pair of mid 80's jeep coils and suffed them in the back. i couldnt wait a couple of days to use a lift so i used this to lift the back end up.
![](http://i65.photobucket.com/albums/h221/c10guy/0607101748-00.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/0607101749-00.jpg)
tht ratchet strap was tight, the pics were after finishing. and the trailer jack still wasnt enough, i had to use a couple more ratchet straps to compress the springs to get them in.
but it was worth it.
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02108.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02100.jpg)
and here's sum of my bumpers=)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02109.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02110.jpg)
and some flex after the coils
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02084.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/20100617195839.jpg)
here's mine a lil bit after i got it
![](http://i65.photobucket.com/albums/h221/c10guy/Cleanyota03.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/Cleanyota02.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/Cleanyota01.jpg)
just had to make it look better.
![](http://i65.photobucket.com/albums/h221/c10guy/aftermudding.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/Aftermudding02.jpg)
mudd is the best and cheapest paint job=)
after the mud got a chance to soak in, as u can see my springs r crap the actually had an under arc.
![](http://i65.photobucket.com/albums/h221/c10guy/Mud051.jpg)
some flex before i installed the coils
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02082.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02083.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02084.jpg)
so i bought a pair of mid 80's jeep coils and suffed them in the back. i couldnt wait a couple of days to use a lift so i used this to lift the back end up.
![](http://i65.photobucket.com/albums/h221/c10guy/0607101748-00.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/0607101749-00.jpg)
tht ratchet strap was tight, the pics were after finishing. and the trailer jack still wasnt enough, i had to use a couple more ratchet straps to compress the springs to get them in.
but it was worth it.
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02108.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02100.jpg)
and here's sum of my bumpers=)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02109.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02110.jpg)
and some flex after the coils
![](http://i65.photobucket.com/albums/h221/c10guy/DSC02084.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/20100617195839.jpg)
![](http://i65.photobucket.com/albums/h221/c10guy/20100617195744.jpg)
#3585
Registered User
Woah! Those were some saggy springs, looks like those coils did the trick for you. Whats with the pink trike and the swing set chains on your bumpers?
#3587
#3589
Registered User
Join Date: May 2010
Location: Hemet, CA.
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
#3594
Registered User
got a new pic!!
![](https://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs066.ash2/36641_436349755189_617700189_6120914_6894915_n.jpg)
i haven't gotten around to the rockers and fenders yet but i will get around to them after i fix the massive rust holes that those STUPID plastic panels in front of the rear tires caused..
![](https://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs066.ash2/36641_436349755189_617700189_6120914_6894915_n.jpg)
i haven't gotten around to the rockers and fenders yet but i will get around to them after i fix the massive rust holes that those STUPID plastic panels in front of the rear tires caused..
![head pop](https://www.yotatech.com/forums/images/smilies/headpop.gif)
Last edited by ET; 06-19-2010 at 08:22 PM.
#3596
Registered User
I always wondered why Toyota put those there. Seems like it'd be a good way to cause rust. I thought about removing them myself, just gotta figure something out with those plastic things stickin out under them...
#3599
Registered User
Join Date: Mar 2009
Location: Vina, Ca.
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Well I hope all the dad's had a great weekend. on my end I got home from the NorCal Off Road Expedition and found out that my wife had planned to take me camping/ fishing for fathers day. We also had my dad and his gf along.
I have a great wife
So while we never got on the water before 8am to do any real fishing, we did do a little scenic tour with my dad and his gf on his boat. Saturday while every one else wanted a nap
I went for a drive. I got to see some pretty cool stuff so i thought I would share.
![Name: _DSC0029.jpg
Views: 140
Size: 66.6 KB](https://www.yotatech.com/forums/attachments/f116/176068d1501885158-post-your-pics-_dsc0029.jpg)
![Name: _DSC0064.jpg
Views: 135
Size: 46.6 KB](https://www.yotatech.com/forums/attachments/f116/176069d1501885158-post-your-pics-_dsc0064.jpg)
![Name: _DSC0059.jpg
Views: 133
Size: 59.4 KB](https://www.yotatech.com/forums/attachments/f116/176070d1501885158-post-your-pics-_dsc0059.jpg)
![grin](https://www.yotatech.com/forums/images/smilies/grin.gif)
![grin](https://www.yotatech.com/forums/images/smilies/grin.gif)
![roll](https://www.yotatech.com/forums/images/smilies/roll.gif)
![Name: _DSC0029.jpg
Views: 140
Size: 66.6 KB](https://www.yotatech.com/forums/attachments/f116/176068d1501885158-post-your-pics-_dsc0029.jpg)
![Name: _DSC0064.jpg
Views: 135
Size: 46.6 KB](https://www.yotatech.com/forums/attachments/f116/176069d1501885158-post-your-pics-_dsc0064.jpg)
![Name: _DSC0059.jpg
Views: 133
Size: 59.4 KB](https://www.yotatech.com/forums/attachments/f116/176070d1501885158-post-your-pics-_dsc0059.jpg)
![Name: _DSC0117.jpg
Views: 133
Size: 52.9 KB](https://www.yotatech.com/forums/attachments/f116/176071d1501885158-post-your-pics-_dsc0117.jpg)
#3600
Registered User
yeah, mine aren't going back on. i think i'm going to just fix the rust there and weld in some clean metal then i'm going to attempt to just put bondo over the whole spot since i'm putting herculiner over it anyways i shouldn't need the stupid things.. if anyone has these i would recommend taking them off and cleaning inside them whenever you wash your truck.