Post Your Pics!!!
#3044
Registered User
Join Date: Jun 2009
Location: North Carolina
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
#3045
Registered User
iTrader: (1)
Quick question to Marcus1941, Mazzola, poweredmotives, or anyone with big tires and little lift.
I personally like that look but do you have to install longer bumbstops? I run 235/75/r15 and fully loaded till it touches the bump stop i have very little room(less than half inch) between the tire and bed. I'm afraid that if i put 31s and fully compress, i'll rip my bed off.
I personally like that look but do you have to install longer bumbstops? I run 235/75/r15 and fully loaded till it touches the bump stop i have very little room(less than half inch) between the tire and bed. I'm afraid that if i put 31s and fully compress, i'll rip my bed off.
#3046
Registered User
Join Date: Feb 2010
Location: Hampton Roads, VA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
I'm stock suspension and no body lift and I clear the 31's pretty good. Could probably rub 33's if I wanted.
By the way Lancer, what tail lights do you have?
By the way Lancer, what tail lights do you have?
Last edited by Mazzola; 04-23-2010 at 10:30 AM.
#3050
Registered User
Join Date: Jun 2009
Location: North Carolina
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
im from around monroe. also there was mud on the bottom of that hole but i was only in the begginnin of it. and it was more like a foot an a half of water in that pic!
#3051
Registered User
to Streetlancer, you should be able to fit 31's stock or 32's with small crank. i ran 32x11.50 on my '92 pickup when it was stock and it rubbed very little.
#3056
Registered User
Join Date: Feb 2010
Location: N. Lake Tahoe/Chico CA
Posts: 1,934
Received 0 Likes
on
0 Posts
heres some after i painted it:
pretty good fer a rattlecan job huh?
DSC_0001.jpg?t=1271556552
DSC_0002.jpg?t=1271556747
DSC_0003_edited-1.jpg?t=1271556810
DSC_0004.jpg?t=1271556851
DSC_0005.jpg?t=1271556897
DSC_0006.jpg?t=1271556946
DSC_0007_edited-1.jpg?t=1271556968
DSC_0008_edited-1.jpg?t=1271557021
DSC_0009.jpg?t=1271557050
DSC_0011.jpg?t=1271557080
aaand a little before and after
before: except after this pic was taken, the black faded almost to a grey. otherwise i would have kept it black.
24.jpg?t=1271557136
after:
DSC_0002.jpg?t=1271557214
pretty good fer a rattlecan job huh?
DSC_0001.jpg?t=1271556552
DSC_0002.jpg?t=1271556747
DSC_0003_edited-1.jpg?t=1271556810
DSC_0004.jpg?t=1271556851
DSC_0005.jpg?t=1271556897
DSC_0006.jpg?t=1271556946
DSC_0007_edited-1.jpg?t=1271556968
DSC_0008_edited-1.jpg?t=1271557021
DSC_0009.jpg?t=1271557050
DSC_0011.jpg?t=1271557080
aaand a little before and after
before: except after this pic was taken, the black faded almost to a grey. otherwise i would have kept it black.
24.jpg?t=1271557136
after:
DSC_0002.jpg?t=1271557214
#3060
Registered User
Join Date: Dec 2008
Location: Florida Panhandle
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts