Not running right after valve cover swap
#21
Well, I fixed the problem FINALLY. I'm not exactly sure what did it, because I worked over pretty much the whole intake system oiling the joints and re-tightening the clamps. I also lifted the plenum and gobbed RTV sealant around and on the gasket. I think it's possible that the mating surface was scuffed a bit from removing the old gasket, so this is probably what did it.
THANKS SO MUCH! to eveyone who helped me with this project!
THANKS SO MUCH! to eveyone who helped me with this project!
Thread
Thread Starter
Forum
Replies
Last Post
jennygirl
86-95 Trucks & 4Runners
11
11-17-2015 11:24 AM
Badger62811
86-95 Trucks & 4Runners (Build-Up Section)
0
06-26-2015 09:26 PM
crazypaint
Buying & Selling Advice - Feeler/Gauging Interest
3
06-23-2015 03:27 AM