NewRunnerPics...maybe
#1
Registered User
Thread Starter
Join Date: Feb 2007
Location: Canada
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
NewRunnerPics...maybe
This is the 4Runner that my girlfriend and I were looking at and as mentioned in a thread couple days ago, unsure of price. Previous thread:
https://www.yotatech.com/forums/f116...runner-127519/
At first glance and walkaround it looks great and as stated before it drives very, very well. Asking price at dealership is $7995 and we "sort of" met at $5000cdn plus tax and bulls*#t admin fee leaves us at $6000cdn in the end...very tempting with only 158,000kms/98,000ish miles on the 22RE, but check out pics...
The Bad...
What do you guys think...is it too much rust on frame etc? Like I said before mechanically everything is sound and drives great with a mint interior. If you look closely at the tailgate there's rust bubbling where the license plate goes and to the right 1-2" down from window. Please, I'm stuck here so any comments welcome.
https://www.yotatech.com/forums/f116...runner-127519/
At first glance and walkaround it looks great and as stated before it drives very, very well. Asking price at dealership is $7995 and we "sort of" met at $5000cdn plus tax and bulls*#t admin fee leaves us at $6000cdn in the end...very tempting with only 158,000kms/98,000ish miles on the 22RE, but check out pics...
The Bad...
What do you guys think...is it too much rust on frame etc? Like I said before mechanically everything is sound and drives great with a mint interior. If you look closely at the tailgate there's rust bubbling where the license plate goes and to the right 1-2" down from window. Please, I'm stuck here so any comments welcome.
#5
Registered User
Join Date: Oct 2006
Location: Woodway, TX
Posts: 1,341
Likes: 0
Received 0 Likes
on
0 Posts
#7
Contributing Member
Join Date: Jul 2003
Location: Orlando, FL
Posts: 9,076
Likes: 0
Received 0 Likes
on
0 Posts
Also like Anthony said, with rust that bad, any bolt that you try and remove will most likely be a huge PITA to work with.
I honestly think you and your girl would be better off looking around...
Good luck!
Fink
Trending Topics
#9
Registered User
Join Date: Oct 2007
Location: Tuscaloosa, AL
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
WOW too much rust for me. it has a great exterior/interior for its age, but i'd go with something in a little better shape on the under side, especially if you are planning on upgrading or working on it yourself. just my 2 cents...
#11
you guys have clearly never been to canada, the land of salt and rust.
thats completely normal for a truck of that age in canada. just make sure the metal is solid, no flaking, no holes. you can keep looking for one with less rust but i doubt you'll find much.
thats completely normal for a truck of that age in canada. just make sure the metal is solid, no flaking, no holes. you can keep looking for one with less rust but i doubt you'll find much.
#12
Registered User
Thread Starter
Join Date: Feb 2007
Location: Canada
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
I see the jury has made a decision eh?...my gut was telling me to wait and find something better but it's so tough to walk from something that is 3/4 in good shape and better than my truck...although my frame is is decent shape. Maybe for half the price it would be worth it but I'm in no condition at this time to work on a vehicle for a while. It really is deceiving but like most of you stated, not worth time/money. Damn....maybe I can talk em' down and show the dealer the pictures...ahhh Unless I get something mid/late nineties rust is inevitable even on the later models. But the price is too much for 3rd and 4th gen. The frame is flaky...not too sure about holes or structural integrity.
Last edited by BluYot; 10-21-2007 at 01:16 PM.
#16
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
I would personally pass on that one. I never trust used car dealerships, who knows what they have covered up with that fancy detail job.
Stick it out for a little longer and find a private seller, then take the car to get a full inspection. It will cost some green but it can save you thousands.
Stick it out for a little longer and find a private seller, then take the car to get a full inspection. It will cost some green but it can save you thousands.
#18
Registered User
This is the 4Runner that my girlfriend and I were looking at and as mentioned in a thread couple days ago, unsure of price. Previous thread:
https://www.yotatech.com/forums/f116...runner-127519/
At first glance and walkaround it looks great and as stated before it drives very, very well. Asking price at dealership is $7995 and we "sort of" met at $5000cdn plus tax and bulls*#t admin fee leaves us at $6000cdn in the end...very tempting with only 158,000kms/98,000ish miles on the 22RE, but check out pics...
The Bad...
What do you guys think...is it too much rust on frame etc? Like I said before mechanically everything is sound and drives great with a mint interior. If you look closely at the tailgate there's rust bubbling where the license plate goes and to the right 1-2" down from window. Please, I'm stuck here so any comments welcome.
https://www.yotatech.com/forums/f116...runner-127519/
At first glance and walkaround it looks great and as stated before it drives very, very well. Asking price at dealership is $7995 and we "sort of" met at $5000cdn plus tax and bulls*#t admin fee leaves us at $6000cdn in the end...very tempting with only 158,000kms/98,000ish miles on the 22RE, but check out pics...
The Bad...
What do you guys think...is it too much rust on frame etc? Like I said before mechanically everything is sound and drives great with a mint interior. If you look closely at the tailgate there's rust bubbling where the license plate goes and to the right 1-2" down from window. Please, I'm stuck here so any comments welcome.
get a 1st gen!
#19
Registered User
Join Date: Sep 2007
Location: Richmond , Va / Henrico Co.
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
If I lived there I would have a Stainless Chasis and fiberglass quarters LOL