new seats, lights hooked up and one shot from camping.
#1
Registered User
Thread Starter
new seats, lights hooked up and one shot from camping.
I got my SR5 buckets installed this weekend and all I can say is WOW! They came out of a 93 4runner and were a direct bolt in for 7 of the 8 bolts. I had to add one for the rear hole near the tranny tunnel on the passengers side.
Old seats (under that cover on the drivers seat is a mess of foam and rips).
New seats.
Lights plumbed in through the plastic insert. I had to buy some new little hold down things since I broke all the originals getting the insert off.
Switch on the left above the radio. I busted the dang platic thing that goes in there so I just have the switch sort of sitting there until I can replace the busted part.
Lights on, yes it's daytime but I was happy to have them working.
A picture from our last camping trip. Believe it or not me, the dog and my wife all slept in there. No issues.
Old seats (under that cover on the drivers seat is a mess of foam and rips).
New seats.
Lights plumbed in through the plastic insert. I had to buy some new little hold down things since I broke all the originals getting the insert off.
Switch on the left above the radio. I busted the dang platic thing that goes in there so I just have the switch sort of sitting there until I can replace the busted part.
Lights on, yes it's daytime but I was happy to have them working.
A picture from our last camping trip. Believe it or not me, the dog and my wife all slept in there. No issues.
#4
Registered User
Thread Starter
Trending Topics
#9
My driver's seat is starting to get beat. I guess a 180lbs guy bouncing down logging roads at 50mph eventually takes its toll. I want to put in 70 Series Land Cruiser seats as they actually have their own suspension!
#10
Registered User
I still love my sr5 buckets, even tho the sholders lean to the center a bit.
#11
Registered User
Thread Starter
Pull em out and straighten the mounts. The DLX's I pulled out were leaning all over the place and I didn't know why until I pulled them out. The mounting feet were all bent to heck, the PO was no "thin mint" so I know how they got that way.
Thread
Thread Starter
Forum
Replies
Last Post
montanatruck
86-95 Trucks & 4Runners
15
02-26-2017 07:07 AM
whereAreMyPants
86-95 Trucks & 4Runners
2
07-22-2015 03:32 AM
HookahRoo
86-95 Trucks & 4Runners (Build-Up Section)
4
07-20-2015 07:06 PM
Johntom240
General Electrical & Lighting Related Topics
7
07-13-2015 12:18 AM
icentropy
86-95 Trucks & 4Runners
4
07-09-2015 02:12 PM