New Problem has shown its ugly face
#104
Registered User
Thread Starter
that's a real good idea...considering im in college and have no money and have over $500 due to my college...then a $350 weber carb is a great idea.......................
#107
Registered User
Thread Starter
there isn't anybody in the immediate area that knows enough about toyota carburetors to take a look at it....just ordinary small town shops... and sorry about that "The Danned"..i was in an extremely bad mood..again i apologize.
cleaned up passages more and it idles a smidgen better....well it does idle now..just very rough..it's getting too much air still..or not enough fuel...i can partially cover the primary barrel and it will run fine and idle up to about 2200 rpms..then i can idle it down to around 800 rpms(with my hand still on the barrel) and it will idle fine..but as soon as i remove my hand from the barrel it will die....
the pump seems to be fine..it will squirt fuel about 7feet in my garage..and if i put it on the truck and accidentally leave the line to the carb unhooked...it will spray fuel EVERYWHERE..LOL
im gonna get some gas in it today (with it runnin so rich it has eat through a 1/4 tank of gas in NO TIME)..and im gonna throw an additive in it to maybe eat up some gunk that could be blocking a line or something..hell idk..there is a guy in town though that said he'll take a look at it (a shop..not just some random guy) for free..he said he doesnt know much about them..but he knows a lot about chevy's and ford's..so he'll try his best..lol
cleaned up passages more and it idles a smidgen better....well it does idle now..just very rough..it's getting too much air still..or not enough fuel...i can partially cover the primary barrel and it will run fine and idle up to about 2200 rpms..then i can idle it down to around 800 rpms(with my hand still on the barrel) and it will idle fine..but as soon as i remove my hand from the barrel it will die....
the pump seems to be fine..it will squirt fuel about 7feet in my garage..and if i put it on the truck and accidentally leave the line to the carb unhooked...it will spray fuel EVERYWHERE..LOL
im gonna get some gas in it today (with it runnin so rich it has eat through a 1/4 tank of gas in NO TIME)..and im gonna throw an additive in it to maybe eat up some gunk that could be blocking a line or something..hell idk..there is a guy in town though that said he'll take a look at it (a shop..not just some random guy) for free..he said he doesnt know much about them..but he knows a lot about chevy's and ford's..so he'll try his best..lol
#108
Registered User
Join Date: Oct 2009
Location: Albuquerque, NM
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
No prob dude, I know this ish can be frustrating. But honestly, diagnosing a carb problem over the infonet can be next to impossible. It sounds like something is a little off with your rebuild and I think you are on the right track finding outside help.
The reason I suggested a Weber is because they are so much simpler than a electronic/emissions carb IMHO, but you have to deal with jetting them correctly and whatnot. So they both have a downside.
The reason I suggested a Weber is because they are so much simpler than a electronic/emissions carb IMHO, but you have to deal with jetting them correctly and whatnot. So they both have a downside.
#109
Registered User
Thread Starter
yes...very very very frustrating..i mean..i guess i could drive it LOL..but i'd rather get it perfect first lol..
well if i had a job..i would go with a weber..i'd love to actually..but with not being able to find a job..it aint lookin to hot..
well if i had a job..i would go with a weber..i'd love to actually..but with not being able to find a job..it aint lookin to hot..
#110
Registered User
Thread Starter
well i just wanted to say that it runs like a bat outta hell..but doesn't idle very good at all..and sometimes it won't idle at all LOL
i just had to take it for a spin though..i miss it too much lmao..if anybody has any info they'd like to share..just type it up and click post reply..LOL cuz i'll try just about anything..except getting a weber..although i might do that when i get some money cuz i been cuttin wood and the cash is stackin up quick
i just had to take it for a spin though..i miss it too much lmao..if anybody has any info they'd like to share..just type it up and click post reply..LOL cuz i'll try just about anything..except getting a weber..although i might do that when i get some money cuz i been cuttin wood and the cash is stackin up quick
Thread
Thread Starter
Forum
Replies
Last Post
skoti89
General Vehicle Related Topics (Non Year Related)
4
09-11-2015 07:46 AM
Yotadawgjr
95.5-2004 Tacomas & 96-2002 4Runners
10
08-23-2015 10:51 AM
Shaun Crystal Gomban
Pre 84 Trucks
5
07-30-2015 10:13 PM
britishdudes2dr
86-95 Trucks & 4Runners
0
07-25-2015 06:47 AM
Kluch8651
95.5-2004 Tacomas & 96-2002 4Runners
0
07-09-2015 10:39 AM