New Exhaust install - Pics and Video!!!
#21
Registered User
I like that alot! I thing you may have convinced my to buy and install that setup on the trail rig. Heck it's less than the local shop quotes for a new exhaust and that doesn't include a header.
#22
Contributing Member
Thread Starter
If I were to do it again, I'd probably get at ceramic coated header, just so that you don't get all dpressed after seeing the paint flake off a brand new header you just spent $180 on but it's not big deal to me, like I said, I kinda expected something like that to happen; I mean comon, the header was less than $200...
really nice quality in the cat-back kit though! I think my decision to go cat-less is probably what made the install a little harder, but leaving it out I didn't have to cut any piping or anything; just bolted right up
#23
Contributing Member
Thread Starter
I got a quick question for you guys...
Ok, see the center hole, between the two studs that are in the middle between cylinders 2 and 3 on the bottom row of studs...
Is there suppose to be a bolt there?
The reason I ask is this is on my old OEM replacement manifold there was in fact a hole there, but I never placed a bolt there. Now on this header there's also a hole in the same place, and upon first install I didn't place a bolt there either:
Well I just tracked down leak already, and guess where it was coming from... THAT HOLE
So I put a bolt in it:
NO MORE LEAK!
But my question is, wth is this threaded hole suppose to be? Is it just for a stud to bolt the manifold to or what?
Ok, see the center hole, between the two studs that are in the middle between cylinders 2 and 3 on the bottom row of studs...
Is there suppose to be a bolt there?
The reason I ask is this is on my old OEM replacement manifold there was in fact a hole there, but I never placed a bolt there. Now on this header there's also a hole in the same place, and upon first install I didn't place a bolt there either:
Well I just tracked down leak already, and guess where it was coming from... THAT HOLE
So I put a bolt in it:
NO MORE LEAK!
But my question is, wth is this threaded hole suppose to be? Is it just for a stud to bolt the manifold to or what?
Last edited by iamsuperbleeder; 02-15-2009 at 08:16 AM.
#24
Registered User
Join Date: Sep 2008
Location: Panama City
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
If you ever wanted to re- paint the headers , they make spray paint call ,"Flame proof". It's holds up to 1500 Degrees .Lots of colors too. They should sell it at any autoparts store.
Last edited by bipolarandproud; 02-15-2009 at 08:38 AM.
#26
Contributing Member
Thread Starter
#27
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
Sounds pretty good!
I hate you say I told you so..... haha!
I hate working on exhaust systems though, Id rather take it to a shop. Im trying to replace the muffler and tailpipe on my 4runner.... I think I might be able to finish this 3 week project tomorrow
I hate you say I told you so..... haha!
I hate working on exhaust systems though, Id rather take it to a shop. Im trying to replace the muffler and tailpipe on my 4runner.... I think I might be able to finish this 3 week project tomorrow
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM