Needing help again
#1
Needing help again
In the wiring going to the oil pressure sending unit there is another wire. I can’t find where that wire plugs in to. The two wires are green one with white stripe and other has yellow stripe. Any help would be greatly appreciated
#2
Registered User
Join Date: Sep 2007
Location: San Francisco East Bay
Posts: 8,299
Likes: 0
Received 841 Likes
on
661 Posts
Is this for a 2019 Escalade? (I'll bet you'll get more useful answers if you tell us the Make/Model/Year/Engine/Body.)
In a 1994 Pickup with 3VZE, G-W could be the brake fluid level switch. Or one of the parking brake switch leads. Or the EGR gas temp sensor. (There's 25 "G-W" labels in my EWD.) G-Y could be another parking brake switch lead. (or 23 other labels) The Oil pressure sender is Y-L.
In a 1994 Pickup with 3VZE, G-W could be the brake fluid level switch. Or one of the parking brake switch leads. Or the EGR gas temp sensor. (There's 25 "G-W" labels in my EWD.) G-Y could be another parking brake switch lead. (or 23 other labels) The Oil pressure sender is Y-L.
The following 3 users liked this post by scope103:
#3
YT Community Team
I bet it’s a regular toyota. Those irregular ones got shipped to third world countries.
The following users liked this post:
swampedout (03-12-2021)
#4
Registered User
On my 1987 Soviet Rocket launcher the green and white wire go to the rapid launch switch, the green and yellow wire is the ABORT switch.
DO NOT get these wires crossed!!!
DO NOT get these wires crossed!!!
The following users liked this post:
RAD4Runner (03-16-2021)
Thread
Thread Starter
Forum
Replies
Last Post
punkelberg
86-95 Trucks & 4Runners
2
10-07-2014 11:55 PM
Flawed
General Electrical & Lighting Related Topics
3
09-17-2011 05:14 AM