LoadWarrior on a 1st Gen 4Runner
#23
Registered User
Thread Starter
Join Date: Oct 2006
Location: Midlothian, VA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking for it.. I'll PM you when I find it. I just looked on their site and found the customer service email or something like that...
#24
Registered User
Thread Starter
Join Date: Oct 2006
Location: Midlothian, VA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
I email BFG and told them about my 31s and my plans for 33s and they only sent me 4 of the little ones. They are two tone red and black. I was lookin forward to some of the big ones but free stickers and free stickers!!
Your 4runner looks great!! Love the roof rack. Also love the 3rd gen wheels, just bought a set for my 4runner!
Your 4runner looks great!! Love the roof rack. Also love the 3rd gen wheels, just bought a set for my 4runner!
#25
Registered User
Thread Starter
Join Date: Oct 2006
Location: Midlothian, VA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
if you go with BJ Spacers dont get the 26MM Downey T-Bars like others have said it kills flex, but i really like it, the rear downey 3" springs and hte Heavy duty 2 1/4" longer than stock shackles give it a nice stance. The only thing i need to do to the rear is maybe add a small 1" block for more clearance. Im bout to post up some pics of the flex in my lift thread wiht my old tires on there in a minute.
#26
Registered User
Thread Starter
Join Date: Oct 2006
Location: Midlothian, VA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
I don't know how they would prove that you knocked them off. I would just email them again though and tell them that the big ones look so awesome on my truck you want some . Feel free to send them a pic of mine.. Maybe they'll give me a break on the 33s
#27
Registered User
Thread Starter
Join Date: Oct 2006
Location: Midlothian, VA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Ok, got some pics of the mounts today. They still have some fiberglass dust on there but whatever. I'm gonna put some washers and nuts on top of the thumbscrews to make it a little more theft deterrent.
Also got my shovel mounted up last night.. Now just need to get the bolts to mount the Hi-Lift:
Hopefully those pics of the mounts make a little more sense now. Let me know if you have any more questions...
Also got my shovel mounted up last night.. Now just need to get the bolts to mount the Hi-Lift:
Hopefully those pics of the mounts make a little more sense now. Let me know if you have any more questions...
#29
Registered User
Join Date: Jun 2006
Location: ashburn va
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
if you go with BJ Spacers dont get the 26MM Downey T-Bars like others have said it kills flex, but i really like it, the rear downey 3" springs and hte Heavy duty 2 1/4" longer than stock shackles give it a nice stance. The only thing i need to do to the rear is maybe add a small 1" block for more clearance. Im bout to post up some pics of the flex in my lift thread wiht my old tires on there in a minute.
#30
Registered User
Thread Starter
Join Date: Oct 2006
Location: Midlothian, VA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Yeah, I just set it where I wanted it and drilled through the existing holes in the Yakima mounts. As far as sealing I just put some silicone on the bolts before I tightened everything down. It seems to be sealed but I'm gonna keep an eye on it to make sure.
#31
Registered User
The front is much stiffer and it makes the ride a little rougher. but b/c they are bigger and cranked a little bit then it doesnt allow the suspension to reach full droop. That is also what i have heard a few times here on YT, so try doing a little searching and see what you come up with.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM