Like I Need Another Project...
#101
Registered User
Join Date: Oct 2007
Location: quesnel b.c Canada
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
i own a turbo dodge. i have changing head gaskets down to an art 6 different cars over the last decade. Oddly i just never have to work on my truck other than change the oil and maintenance stuff.
Toyota has spoilt me.
Toyota has spoilt me.
#102
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
Got the heads back today. I need to go back and ask specifically how much he took off of them. He didnt say it was alot but he did say it wasnt a little. I'm thinking the block might need some help. Yall think I should worry about getting a thicker head gasket?
#105
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
So I checked the block the only way I could. Thickest, straightest, heaviest, steel ruler I could find. I couldn't get the .006 feeler gauge through anywhere. Im guessing the block is ok.
Sooooo, off to go scotch brite it and throw them heads on. Cant think of anything else to do before torqueing the heads down other than turning to TDC????
Sooooo, off to go scotch brite it and throw them heads on. Cant think of anything else to do before torqueing the heads down other than turning to TDC????
#106
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
OK, just had another idea (great), wonder if I should bolt the manifolds and crossover up to the heads and put them in the same way they came out?
#107
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
I hope thats clean enough. I can feel that they arent perfectly smooth. But they are pretty good?
Somebody say something. I hate talking to myself.
#108
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
So all the ratchet are getting set the other way and I'm breaking out possibly my favorite tool, the Snap-on torque wrench.
29ftlbs Seems a little low for exhaust mani... oh well... thats what it says in the FSM.
29ftlbs Seems a little low for exhaust mani... oh well... thats what it says in the FSM.
Last edited by toylocost; 07-24-2009 at 05:31 PM.
#109
Contributing Member
[/Quote]Somebody say something. I hate talking to myself.[/QUOTE]
HAHAHA!!!! I feel the same way , I am in a little corner of yotatech nobody ever visits .
Dude just make sure you dont feel anything on the heads , use some laquer thinner on there also.
When you do the valve adjustments , if you need any shims let me know I have a few laying around and may have one you need .
I think I could ship one or two your way with a couple of stamps so no big deal.
HAHAHA!!!! I feel the same way , I am in a little corner of yotatech nobody ever visits .
Dude just make sure you dont feel anything on the heads , use some laquer thinner on there also.
When you do the valve adjustments , if you need any shims let me know I have a few laying around and may have one you need .
I think I could ship one or two your way with a couple of stamps so no big deal.
#110
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
How bad do you think I need to adjust them? I work at Toyota so I can probably get the shims no problem. Thanks for the offer though, stuff like that makes me more willing to help you in the future.
Anybody know what this thing is called? I dont believe ENGNBLDR sent me a gasket for it...
And look at this... You can see that the old gasket has some type of inner crush ring that the new one doesnt have. Should I worry?
ExManis are torqued to the heads, crossover is finger tight, heads are torqued to 33ftlbs. They still need to be turned the extra 180 degs.
Used a white-out pen to mark the head bolts before turning them their two 90 degree turns. Worked very well. (I think my macro setting is broke, its useless)
Anybody know what this thing is called? I dont believe ENGNBLDR sent me a gasket for it...
And look at this... You can see that the old gasket has some type of inner crush ring that the new one doesnt have. Should I worry?
ExManis are torqued to the heads, crossover is finger tight, heads are torqued to 33ftlbs. They still need to be turned the extra 180 degs.
Used a white-out pen to mark the head bolts before turning them their two 90 degree turns. Worked very well. (I think my macro setting is broke, its useless)
Last edited by waskillywabbit; 07-31-2009 at 05:20 AM. Reason: Inappropriate Language Removed
#111
Registered User
Join Date: Oct 2007
Location: quesnel b.c Canada
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
woo hooo lookin killer. i woulda threw in some encouraging words but i just cant keep up i guess! your gonna really have to steam clean that engine bay after all this to match those purdy heads!
#112
Contributing Member
the first pic is of the #1 water By pass pipe you seal it with FIPG and torque the nuts 6.9 N-m (61 in.-lbf) and the bolt to 4.9 N-m (43in.-lbf).
And I did not know you worked at toyota , I guess that makes a difference when Needing parts.
And I did not know you worked at toyota , I guess that makes a difference when Needing parts.
#114
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
It does help especially if I need to ask the mechanics about something. But parts are still expensive even with the discout. haha
Uhhh, yeah mine are absolutley screwed. They barely spin. lol
#116
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
What are these things the injectors sit in? Can I clean them off and re-use them? I think Toyota wants about 6 bucks a peice for them.
#117
Registered User
Join Date: Jul 2009
Location: las cruces,NM
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Im sure you can i reused mine and they worked fine,they are used to seal the injector in the manifold so u dont loose vacuum.cant remember the specifice name for them.
#119
Registered User
Thread Starter
Join Date: Jul 2007
Location: Yotatech, because Pirate is too expensive. NorCal.
Posts: 1,705
Likes: 0
Received 10 Likes
on
5 Posts
Thank you. I sorry I didnt see this earlier. This is the second time it hasnt bumped this to my subscribed threads when someone replied.
Today I got my order in...
Air filter
Knock sensor wire
A/C belt
P/S belt
Fan belt
Timing belt
Water hose
T-stat
T-stat gasket
Wires
Cap
Rotor
6 NGK V-powers (upon reccomendation by Tubbyfatty)
Oil filter
drain plug gasket
5 quarts of oil
Water pump will be here tommorow
I realized I forgot to get coolant so maybe grab that and some assembly lube.
Today I got my order in...
Air filter
Knock sensor wire
A/C belt
P/S belt
Fan belt
Timing belt
Water hose
T-stat
T-stat gasket
Wires
Cap
Rotor
6 NGK V-powers (upon reccomendation by Tubbyfatty)
Oil filter
drain plug gasket
5 quarts of oil
Water pump will be here tommorow
I realized I forgot to get coolant so maybe grab that and some assembly lube.
#120
Contributing Member
Join Date: Jun 2007
Location: Where it always works if you work it, in Sunny Selinsgrove, PA
Posts: 2,336
Likes: 0
Received 2 Likes
on
2 Posts
Thank you. I sorry I didnt see this earlier. This is the second time it hasnt bumped this to my subscribed threads when someone replied.
Today I got my order in...
Air filter
Knock sensor wire
A/C belt
P/S belt
Fan belt
Timing belt
Water hose
T-stat
T-stat gasket
Wires
Cap
Rotor
6 NGK V-powers (upon reccomendation by Tubbyfatty)
Oil filter
drain plug gasket
5 quarts of oil
Water pump will be here tommorow
I realized I forgot to get coolant so maybe grab that and some assembly lube.
Today I got my order in...
Air filter
Knock sensor wire
A/C belt
P/S belt
Fan belt
Timing belt
Water hose
T-stat
T-stat gasket
Wires
Cap
Rotor
6 NGK V-powers (upon reccomendation by Tubbyfatty)
Oil filter
drain plug gasket
5 quarts of oil
Water pump will be here tommorow
I realized I forgot to get coolant so maybe grab that and some assembly lube.
nice work, I like the can-do attitude