Lift kit and 33: Installed
#1
Registered User
Thread Starter
Lift kit and 33: Installed
Thanks Chris (tofer) and Gabe for the help
I still need rear shocks, NEW driver side CV boot, front end alignment, and to install the camary afm, but here are some updated pix for you guys.
BEFORE
AFTER
ISR MOD and KN intake = waste of money. their is very little power difference, i can tell its their, but only just. The 3.sloiw is just that, DONTtry to make it faster.
The lift, 1.5" BJ spacers and FJ80 Crusier Coils
I still need rear shocks, NEW driver side CV boot, front end alignment, and to install the camary afm, but here are some updated pix for you guys.
BEFORE
AFTER
ISR MOD and KN intake = waste of money. their is very little power difference, i can tell its their, but only just. The 3.sloiw is just that, DONTtry to make it faster.
The lift, 1.5" BJ spacers and FJ80 Crusier Coils
#3
Registered User
Thread Starter
Autozone, Rather then drilling and taping holes in the isr, i just put those on, gotta be careful if you go mudding, but i try to stay out of mud pits anyways
#5
Registered User
I got that spectre piping going on after my stock hose tore.... got the ISR hooked up.. PCV is just chillin, though. got a hose on it blocked with a bolt at the other end.
#6
Registered User
Thread Starter
#7
Registered User
Join Date: Feb 2007
Location: Sierra Nevada's or the Deserts of Las Vegas
Posts: 2,203
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
wow! My truck sits a tad higher then yours yet I have 3" more lift. Stupid ifs.... haha
I like the look of the trail-gear bumper, but the stinger looks a tad big imo...
#9
Contributing Member
yer tires are all \-/ , definately get an alignment before you go driving around and ruin those new tires
looks great though man!
you trust that shackel on the factory hoop on the frame? that's some rather thin metal; don't try to pull on it at an angle you should invest into some of sodori's bolt-on shackel mounts
also, I see the BFG MT's, but what's that front-right tire?
looks great though man!
you trust that shackel on the factory hoop on the frame? that's some rather thin metal; don't try to pull on it at an angle you should invest into some of sodori's bolt-on shackel mounts
also, I see the BFG MT's, but what's that front-right tire?
Last edited by iamsuperbleeder; 02-01-2009 at 12:36 PM.
#11
Registered User
Join Date: Jan 2009
Location: Everett, WA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Hey man, looks great! I just did coil spacers and t-bar crank until I get bj spacers. Any clearance issues with the 33's? Doesn't look like it, but thinking about sizing up, can't make up my mind!
Also, have you noticed any reduced speed as the result of bigger tires or a hurt in MPG?
Also, have you noticed any reduced speed as the result of bigger tires or a hurt in MPG?
Last edited by sexasomniac; 02-01-2009 at 12:16 PM.
#14
Contributing Member
#17
Registered User
Join Date: Jan 2009
Location: Everett, WA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered User
Join Date: Jul 2008
Location: Grew up in S.C.V, So Cal.....now in Hampstead, NC
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
What year FJ80 Crusier Coils, and what is your TOTAL overall lift over stock? You said that you didn't touch your T-bars.....
#20
Registered User
Thread Starter
Yes i know the other tire is a wild country, the bracket is from 4crawler, and i didnt have rubbing issues with thee 33 even before i got the lift, they fit fine.